Mark this thread as Unsold
Wanted lsj parts
#1
Banned
Thread Starter
iTrader: (20)
Join Date: 03-06-10
Location: Dubuque, Iowa
Posts: 7,027
Likes: 0
Received 0 Likes
on
0 Posts
lsj parts
OTTP intake 3 inch - BOUGHT
ZZP sc w/bypass and stock pulley - BOUGHT
ZZP intake - BOUGHT
Intake mani - BOUGHT
Intake mani bracket - BOUGHT
ZZP custom idler pulley - BOUGHT
ZZP belt - BOUGHT
Filler neck - BOUGHT
sc gasket
intake mani gasket
ZZP triple gauge pod - BOUGHT
upper radiator hose - BOUGHT
siemens 60 lb injectors with ev6 harness - BOUGHT
dual pass - BOUGHT
zzp s3 h/e - BOUGHT
ic pump
Ic pump bracket - BOUGHT
lsj tb and harness - BOUGHT
Lsj washer fluid reservoir - BOUGHT
badmab header
zzp catted dp - auto
catbak
also need most of the bolts if anyone knows a site to order them thanks.
gauges ill be getting from glowshift.
i havent bothered to look but is there a sensor in the header and dp or just one or the other. reason i ask is i no when i get a dp ill need a bung for my wideband but when i go to order from zzp there options are
1. add an o2 bung for wideband
2. add an o2 bung for 2.2/2.4
so which would i choose since im needing both??
ZZP sc w/bypass and stock pulley - BOUGHT
ZZP intake - BOUGHT
Intake mani - BOUGHT
Intake mani bracket - BOUGHT
ZZP custom idler pulley - BOUGHT
ZZP belt - BOUGHT
Filler neck - BOUGHT
sc gasket
intake mani gasket
ZZP triple gauge pod - BOUGHT
upper radiator hose - BOUGHT
siemens 60 lb injectors with ev6 harness - BOUGHT
dual pass - BOUGHT
zzp s3 h/e - BOUGHT
ic pump
Ic pump bracket - BOUGHT
lsj tb and harness - BOUGHT
Lsj washer fluid reservoir - BOUGHT
badmab header
zzp catted dp - auto
catbak
also need most of the bolts if anyone knows a site to order them thanks.
gauges ill be getting from glowshift.
i havent bothered to look but is there a sensor in the header and dp or just one or the other. reason i ask is i no when i get a dp ill need a bung for my wideband but when i go to order from zzp there options are
1. add an o2 bung for wideband
2. add an o2 bung for 2.2/2.4
so which would i choose since im needing both??
Last edited by heathkidder; 02-03-2012 at 02:04 AM.
#2
Platinum Member
Join Date: 03-16-07
Location: Saskatchewan, Canada
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
I believe that there is an O2 bung on that header IIRC, but I'd check with someone who has that header. For the DP, you would need to then add the O2 Bung for the wideband and I don't think you would need to add the O2 Bung for the 2.2/2.4 as I think all Deltas have the O2 bung downstream of the cat on the DP. This would give you the three O2 bungs you need for all the sensors.
#4
Premium Member
iTrader: (8)
Join Date: 02-23-11
Location: Ohio
Posts: 3,454
Likes: 0
Received 0 Likes
on
0 Posts
I believe that there is an O2 bung on that header IIRC, but I'd check with someone who has that header. For the DP, you would need to then add the O2 Bung for the wideband and I don't think you would need to add the O2 Bung for the 2.2/2.4 as I think all Deltas have the O2 bung downstream of the cat on the DP. This would give you the three O2 bungs you need for all the sensors.
#10
Platinum Member
Join Date: 03-16-07
Location: Saskatchewan, Canada
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
Stock number of O2 sensors is two. If you have a wideband you'll have three O2 Sensors.
There is only one O2 bung in a stock LSJ downpipe and for the ZZP downpipe (I know you're not an LSJ, I'm just referencing the products you are looking for). Assuming you'll be getting the badmab header, you will only neeed two O2 Bungs in the downpipe you choose as there is an O2 bung in the badmab header making a total of 3 O2 bungs for the 3 sensors you have in your current setup because you have a wideband O2 installed.
I hope this helps.
There is only one O2 bung in a stock LSJ downpipe and for the ZZP downpipe (I know you're not an LSJ, I'm just referencing the products you are looking for). Assuming you'll be getting the badmab header, you will only neeed two O2 Bungs in the downpipe you choose as there is an O2 bung in the badmab header making a total of 3 O2 bungs for the 3 sensors you have in your current setup because you have a wideband O2 installed.
I hope this helps.