Mark this thread as Unsold
Prototype Blower
Prototype Blower
We have in our possession a 7th generation LSJ M62 supercharger with High Helix Technology. This is 1 of 7 made and was tested to make 20hp more the m62 currently on the LSJ engines with any given pulley size. We are going to offer this supercharger as a package. Included in this package is installation, custom dyno tune and the supercharger for a price of 1775.00 to the first person who pays.
We made these 2 pulls with the same pulley 1 hour between. The supercharger being the only difference. It showed a 1.5 lb increase in boost and the outlet temps were 14 degrees cooler. To order use the link below
http://www.intense-racing.com/Mercha...t_Code=COI-100
We made these 2 pulls with the same pulley 1 hour between. The supercharger being the only difference. It showed a 1.5 lb increase in boost and the outlet temps were 14 degrees cooler. To order use the link below
http://www.intense-racing.com/Mercha...t_Code=COI-100
Last edited by Highhp; Jan 14, 2008 at 09:27 AM.
It was a 2.9 pulley, with 42lbs injectors. And this was almost 2 years ago.
It also includes installation and a custom dyno tune
It also includes installation and a custom dyno tune
Last edited by Highhp; Jan 4, 2008 at 05:56 PM. Reason: Automerged Doublepost
is this custom tune going to be for what we have on the car or is it one already done for the car that had this on? what im asking is i have meth injection...so if its not going to be a custom tune for me then i cant justafy to my wife that i can do this...
Senior Member
iTrader: (1)
Joined: 07-02-05
Posts: 8,725
Likes: 2
From: West Carrollton (Dayton), OH
I have been in communication with a company tied to the TVS production and it will have a direct bolt-up kit avail from the last email I had. I should be hearing soon on it and hopefully be one of the firsts to use the kit. Goin for sponsorship/prototyping
so 20 hp for a supercharger swap and a tune? you can probably get close to that with a tune depending on mods. installation is probably pretty simple, so if anything i bet people would just want a price for the blower itself.
sure there are cheaper ways to get 20hp, however when you figure say a 2.6, meth, dual pass, cobra, full exaust, ect making 280hp on a stock blower, could be seeing 300+ with this blower.


