ZZP HE, G Line wheels, RK Sport hood and more
 

I recently purchased a car for parts and I'm selling off some of the stuff I don't need. I have a ZZP heat exchanger, vibrant header and catless downpipe that I'm ready to get rid of now. The HE is a little beat up and when I pulled it off it had some nasty water in it so I would recommend flushing it. The header has a 2-1/2" exit on the manifold and a 2-3/8" exit on the downpipe. I was thinking about cleaning it up some (looks like previous owner started to) but I figured it'll just look like that eventually. Not sure how well it would work performance wise on an SC but maybe a good option for an NA cobalt.

HE = $70+ shipping/paypal feesSold
Header & downpipe = $150 + shipping/paypal fees SOLD SOLD

http://i723.photobucket.com/albums/w...917_154141.jpg

http://i723.photobucket.com/albums/w...917_154212.jpg

http://i723.photobucket.com/albums/w...917_154221.jpg

http://i723.photobucket.com/albums/w...917_154240.jpg

http://i723.photobucket.com/albums/w...917_154150.jpg

http://i723.photobucket.com/albums/w...917_154159.jpg

http://i723.photobucket.com/albums/w...917_154336.jpg

http://i723.photobucket.com/albums/w...917_154345.jpg

http://i723.photobucket.com/albums/w...917_154512.jpg

http://i723.photobucket.com/albums/w...917_154617.jpg

http://i723.photobucket.com/albums/w...917_154437.jpg

http://i723.photobucket.com/albums/w...917_154412.jpg

Sorry to ask but is the header for the LNF or other.
Thanks

Other

Any reasonable offers?

Header and DP sold.

Bump...I got the engine out so I don't need the hood anymore. RK sport ram air hood. The engine popped the dipstick and sprayed oil everywhere hence all the black shit on the bottom. There are some cracks in the paint on the top, I'm assuming it wasn't prepped/painted well. The top is also very dirty since the car sat for a while. $300 obo local pickup. I could maybe drive an hour or so to meet up. I'm located in Suffolk, Va.

http://i723.photobucket.com/albums/w...010_163750.jpg

http://i723.photobucket.com/albums/w...010_163812.jpg

http://i723.photobucket.com/albums/w...010_163825.jpg

http://i723.photobucket.com/albums/w...010_163831.jpg

http://i723.photobucket.com/albums/w...010_163836.jpg

G line G253 18X8 5X100 ET40 wheels. I was hoping to sell them on craigslist but no bites yet which is the reason for the old date. Anyway, they don't have any curb rash but it looks like the PO tried to run them with brembos and got some rubbing on the inside (they don't clear brembos). The clear coat is messed up in a couple spots and the tires are shot. Looking for $200 obo locally. Again, I can drive an hour or so to meet up.


http://i723.photobucket.com/albums/w...917_153021.jpg

http://i723.photobucket.com/albums/w...916_165211.jpg

http://i723.photobucket.com/albums/w...917_153306.jpg

http://i723.photobucket.com/albums/w...917_153316.jpg

http://i723.photobucket.com/albums/w...917_153031.jpg

http://i723.photobucket.com/albums/w...917_153041.jpg

http://i723.photobucket.com/albums/w...917_153049.jpg

http://i723.photobucket.com/albums/w...917_153058.jpg

http://i723.photobucket.com/albums/w...917_153205.jpg

http://i723.photobucket.com/albums/w...917_153209.jpg

http://i723.photobucket.com/albums/w...917_153216.jpg

I'll also have a ZZP cai for sale soon. The PO didn't bolt it down so the sheet metal on the car wore two slits in it (didn't go all the way thru but close on one of them). I'm repairing it with some JB weld but haven't got a chance to finish it up yet. It was mated to an LS4 TB so it has some generic coupler to do so. I'm unsure on whether I'm keeping the TB yet.

Someone make an offer on the HE...

ZZP adjustable tensioner=$85 plus shipping

Attachment 62743


Attachment 62744

Does the HE leak? Looks like it has holes in the tank.
​​​​​​

does the HE leak? looks like it has holes in it.

Edit: Sorry for the double post, the first one did not seem to go through

It had fluid in it when I took it out and I didn't see any evidence that it had been leaking. The gouges don't seem to go through. I'll fill it up with water to make sure. If I could weld aluminum I'd put a quick bead on it. If you're interested in it and wanted me to I could put some JB weld on it.

Up next is a ZZP CAI and LS4 throttle body. As I said before, the PO didn't have it bolted down and it rubbed some slits in it. I filed the slits some, filled with jb weld and filed/sanded back down. The slits didn't go all the way through. I left it unpainted in case whoever gets it wanted to sand the whole thing and change the color. The elbow for the LS4 is some "JDM" one.

CAI=$90 plus shipping SOLD SOLD
TB=$30 plus shippingSOLD SOLD
or buy both for $120

Attachment 62735

Attachment 62736

Attachment 62737

Attachment 62738

Attachment 62739

Attachment 62740

Attachment 62741

Attachment 62742

pm'ed

Dual pass (I have the Tee as well)=$70 plus shipping SOLD SOLD

Attachment 62728

Attachment 62729

Attachment 62730

GM 42# injectors I believe. I'm not a Cobalt injector expert so someone correct me if I'm wrong.

$80 plus shipping

Attachment 62731

Attachment 62732

Attachment 62733

Attachment 62734

pmd

HE sold.

Dual pass sold.

ZZP CAI and LS4 TB sold.

Bump for the injectors and adjustable tensioner.

Bump for a good seller. Great shipping time and parts were packaged well.

Bump...Injectors, adjustable tensioner, hood, and wheels still available.

Adjustable tensioner sold.

Injector still 4 sale?

Yes they are.

Bump, someone buy the hood, wheels, and injectors. At this point I just want it gone.