Mark this thread as Unsold
Another 2006 SS S/C Partout...
Thread Starter
New Member
Joined: 12-24-05
Posts: 175
Likes: 0
From: Tuscaloosa, Alabama
Another 2006 SS S/C Partout...
Hello all,
I currently own a 2006 Chevy Cobalt SS/SC. But in a few months time I will be trading her in, possibly on the new TC Cobalt. I am looking for someone who has a stock Cobalt SS/SC and who wants a GREAT deal on all of these parts. I'd rather sell everything has a complete set, but if I have too I will take all of the parts off at once and then sell them individually. Here's what I have:
Basically I'll have the following available:
Intense pulley system with 2.5, 2.7, and 3.0 inch pulley's
Intense pulley removal and installation tool
MSD 60 lb/hr injectors with harness
Aeromotive Scan Guage
AEM UEGO wideband
Three guage pillar pod made by Cobalt Addiction and custom painted to match interior
ZZP Header and downpipe combo (although I'll need a stock manifold and stock exhaust to sell those)
If someone has a stock exhaust to trade, I have a custom 3" exhaust with a Borla Pro XS resonator and 40 series Flowmaster with a stock looking tip.
Eibach Sportline Springs
Prothane Tranny mounts
Hurst Short Throw Shifter
I also have HP Tuners MVPI Pro, but I will be keeping that.
If someone wants to do a complete swap over, I am willing to let everything go for 1,000. This is a GREAT deal, and I will even give your car a killer tune for free.
I currently own a 2006 Chevy Cobalt SS/SC. But in a few months time I will be trading her in, possibly on the new TC Cobalt. I am looking for someone who has a stock Cobalt SS/SC and who wants a GREAT deal on all of these parts. I'd rather sell everything has a complete set, but if I have too I will take all of the parts off at once and then sell them individually. Here's what I have:
Basically I'll have the following available:
Intense pulley system with 2.5, 2.7, and 3.0 inch pulley's
Intense pulley removal and installation tool
MSD 60 lb/hr injectors with harness
Aeromotive Scan Guage
AEM UEGO wideband
Three guage pillar pod made by Cobalt Addiction and custom painted to match interior
ZZP Header and downpipe combo (although I'll need a stock manifold and stock exhaust to sell those)
If someone has a stock exhaust to trade, I have a custom 3" exhaust with a Borla Pro XS resonator and 40 series Flowmaster with a stock looking tip.
Eibach Sportline Springs
Prothane Tranny mounts
Hurst Short Throw Shifter
I also have HP Tuners MVPI Pro, but I will be keeping that.
If someone wants to do a complete swap over, I am willing to let everything go for 1,000. This is a GREAT deal, and I will even give your car a killer tune for free.
Junior Member
Joined: 12-20-07
Posts: 421
Likes: 0
From: North Carolina
Hello all,
I currently own a 2006 Chevy Cobalt SS/SC. But in a few months time I will be trading her in, possibly on the new TC Cobalt. I am looking for someone who has a stock Cobalt SS/SC and who wants a GREAT deal on all of these parts. I'd rather sell everything has a complete set, but if I have too I will take all of the parts off at once and then sell them individually. Here's what I have:
Basically I'll have the following available:
Intense pulley system with 2.5, 2.7, and 3.0 inch pulley's
Intense pulley removal and installation tool
MSD 60 lb/hr injectors with harness
Aeromotive Scan Guage
AEM UEGO wideband
Three guage pillar pod made by Cobalt Addiction and custom painted to match interior
ZZP Header and downpipe combo (although I'll need a stock manifold and stock exhaust to sell those)
If someone has a stock exhaust to trade, I have a custom 3" exhaust with a Borla Pro XS resonator and 40 series Flowmaster with a stock looking tip.
Eibach Sportline Springs
Prothane Tranny mounts
Hurst Short Throw Shifter
I also have HP Tuners MVPI Pro, but I will be keeping that.
If someone wants to do a complete swap over, I am willing to let everything go for 1,000. This is a GREAT deal, and I will even give your car a killer tune for free.
I currently own a 2006 Chevy Cobalt SS/SC. But in a few months time I will be trading her in, possibly on the new TC Cobalt. I am looking for someone who has a stock Cobalt SS/SC and who wants a GREAT deal on all of these parts. I'd rather sell everything has a complete set, but if I have too I will take all of the parts off at once and then sell them individually. Here's what I have:
Basically I'll have the following available:
Intense pulley system with 2.5, 2.7, and 3.0 inch pulley's
Intense pulley removal and installation tool
MSD 60 lb/hr injectors with harness
Aeromotive Scan Guage
AEM UEGO wideband
Three guage pillar pod made by Cobalt Addiction and custom painted to match interior
ZZP Header and downpipe combo (although I'll need a stock manifold and stock exhaust to sell those)
If someone has a stock exhaust to trade, I have a custom 3" exhaust with a Borla Pro XS resonator and 40 series Flowmaster with a stock looking tip.
Eibach Sportline Springs
Prothane Tranny mounts
Hurst Short Throw Shifter
I also have HP Tuners MVPI Pro, but I will be keeping that.
If someone wants to do a complete swap over, I am willing to let everything go for 1,000. This is a GREAT deal, and I will even give your car a killer tune for free.
dibs on short throw and tranny mounts. how much for both shipped to north carolina??
Banned
Joined: 04-01-07
Posts: 7,914
Likes: 0
From: Braidwood, Illinois
yo blazing my paypal is Altiery54@yahoo.com if u want to send me some money
Senior Member
Joined: 11-27-07
Posts: 1,708
Likes: 0
From: MD
yo blazing my paypal is Altiery54@yahoo.com if u want to send me some money
Banned
Joined: 04-01-07
Posts: 7,914
Likes: 0
From: Braidwood, Illinois
do u have a paypal account? if not make 1 make 1 and send him $$ from ur credit card or ur bank and he'll sned ur goods
Senior Member
Joined: 11-27-07
Posts: 1,708
Likes: 0
From: MD
Thread Starter
New Member
Joined: 12-24-05
Posts: 175
Likes: 0
From: Tuscaloosa, Alabama
Wow, I haven't checked this thread in a few days, and I appreciate all of the interest! However, I would really like to find someone who is willing to take everything as a package for now. It would just be alot easier on me and I can do everything at once.
I also have the GM Stage III End plate for the laminova tubes as well.
There has to be somebody somewhat local who is willing to take all of this stuff!!!
-Vincent
I also have the GM Stage III End plate for the laminova tubes as well.
There has to be somebody somewhat local who is willing to take all of this stuff!!!
-Vincent
Thread Starter
New Member
Joined: 12-24-05
Posts: 175
Likes: 0
From: Tuscaloosa, Alabama
Okay well I have decided to sell everything eventually and I have slowly been putting the car back to stock.
Here is what I have:
60 lb/hr injectors (set of 4) I also have two extra injectors as well
Injector wiring harness for siemens style injectors
Intense Pulley hub and 2.5", 2.7" and 3.0" pulleys
3" Belt tensioner (works good on 2.5" pulley)
Aeroforce Interceptor scan guage
Cobalt addiction triple gauge pod
Intense Pulley removal tool with adaptor for removing small pulley's
I also have two ECM's for sale...one has a stock tune and the other one I'm not sure of.
I have a stock hydraulic throw out bearing with 25k miles on it.
Stock GM Endplate for aftercooler
The wideband I plan on keeping for now for my race car.
I will also consider selling my HP Tuners MVPI Pro and all of my tunes as well for the right price...
I will have pics/prices up tomorrow. Feel free to make me a fair offer in the meantime on this stuff until then.
Thanks,
Vincent
Here is what I have:
60 lb/hr injectors (set of 4) I also have two extra injectors as well
Injector wiring harness for siemens style injectors
Intense Pulley hub and 2.5", 2.7" and 3.0" pulleys
3" Belt tensioner (works good on 2.5" pulley)
Aeroforce Interceptor scan guage
Cobalt addiction triple gauge pod
Intense Pulley removal tool with adaptor for removing small pulley's
I also have two ECM's for sale...one has a stock tune and the other one I'm not sure of.
I have a stock hydraulic throw out bearing with 25k miles on it.
Stock GM Endplate for aftercooler
The wideband I plan on keeping for now for my race car.
I will also consider selling my HP Tuners MVPI Pro and all of my tunes as well for the right price...
I will have pics/prices up tomorrow. Feel free to make me a fair offer in the meantime on this stuff until then.
Thanks,
Vincent
