Mark this thread as Unsold
For Sale FS: ss/sc wheels/BFG drag radials
#1
New Member
Thread Starter
iTrader: (1)
Join Date: 02-02-09
Location: Clarkston, MI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
FS: ss/sc wheels/BFG drag radials
(2) 18" SS/SC graphite wheels and 245-40-18 BFG drag radials. Mounted and balanced. I bought these at the beginning of the year and never ended up using them. They are used, but still have life left. One wheel has some curb rash, not terrible. Sold the car, so i dont need these anymore. Paypal or cash in person only. Pickup only, unless the buyer wants to pay for and arrange shipping.
Fox4life@gmail.com
Fox4life@gmail.com
#2
New Member
Thread Starter
iTrader: (1)
Join Date: 02-02-09
Location: Clarkston, MI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Still available. Just realized I never posted a price. They are 200$ obo. Pretty flexible with the price too.
Last edited by Fox4life; 09-01-2010 at 10:46 AM. Reason: added price
#7
New Member
Thread Starter
iTrader: (1)
Join Date: 02-02-09
Location: Clarkston, MI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I could check on shipping if you were interested. Just let me know. Just have to get them weighed.
All pm's have been replied to. As of right now they are still available.
All pm's have been replied to. As of right now they are still available.
#12
Senior Member
iTrader: (4)
I have found htat sometimes you need to look in other locations - most catagory's are for RWD cars
I also recently found out that BFG dropped a TON of sizes in their drag radial series...
I found these same tires listed here:
http://www.tyretown.com/1193_bfgoodr...dragradial.htm
I found that same size available as a mickey thompson:
http://www.mickeythompsontires.com/s...StreetRadialII
I also recently found out that BFG dropped a TON of sizes in their drag radial series...
I found these same tires listed here:
http://www.tyretown.com/1193_bfgoodr...dragradial.htm
I found that same size available as a mickey thompson:
http://www.mickeythompsontires.com/s...StreetRadialII
Last edited by soundjunky; 09-06-2010 at 11:43 PM.
#17
New Member
Thread Starter
iTrader: (1)
Join Date: 02-02-09
Location: Clarkston, MI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Sorry everyone ive been really busy with work lately, but I Pm'd everyone back with shipping quotes that i could remember that asked. If i missed you and youre still interested just let me know and ill get a quote for you.
And, sorry black ss 07 The furthest i could go would be lansing, if you were wanting to meet me there we could arrange something.
And, sorry black ss 07 The furthest i could go would be lansing, if you were wanting to meet me there we could arrange something.
#24
Senior Member
iTrader: (4)
SS/TC brakes + LSJ wheels + 5mm = ample clearance
These wheels without spacers would just barely rub the calipers;
I knew this before buying these because I previously has a full set of smoke-tint LSJ wheels that I had sized up on my car early this past spring (I later sold them to a kid who wrecked a couple of his wheels).
FYI; the other delta 17" rims which clear the SS/TC calipers;
if you saw it in person, you would swear they don't clear - I had to rip a chunk off of a paper fast food bag that I had in my car to verify there was no dragging when I sized up a set early this year;
They did indeed clear, but it was so close, that I would still run at least a 3mm spacer so that sand (ect) wouldn't scratch up the fancy caliper's outer face.
These wheels without spacers would just barely rub the calipers;
I knew this before buying these because I previously has a full set of smoke-tint LSJ wheels that I had sized up on my car early this past spring (I later sold them to a kid who wrecked a couple of his wheels).
FYI; the other delta 17" rims which clear the SS/TC calipers;
if you saw it in person, you would swear they don't clear - I had to rip a chunk off of a paper fast food bag that I had in my car to verify there was no dragging when I sized up a set early this year;
They did indeed clear, but it was so close, that I would still run at least a 3mm spacer so that sand (ect) wouldn't scratch up the fancy caliper's outer face.