2 sets of pc'd sc wheels, 2,7", 2.8", pd'd valve cover, drag radials, zzp longtube...
20 Attachment(s)
Adam V
All wheels i prefer local pickup/meetup, near chicagoland. Otherwise 35 shipping per wheel and i refund the difference if its less. Zzp longtube header and downpipe. Downpipe is like a year and a half old, header is brand new. Slight leak at downpipe at exit flange, a remflex gasket takes care of it for the most part. Perhaps vend the ears back a bit to be sure. Has extra bung for wideband 2.5" exit, 2 new vband clamps! 400 shipped? After shipping thats like 200 cheaper than new from zzp Attachment 20769 Attachment 20770 Attachment 20771 Attachment 20772 Attachment 20773 Anthracite metallic s/c wheels. Powdercoated 2ish years ago, really great condition. No curb rash. They look awesome. 200 for the set. 2 wheels have tires i can get removed if wanted. They are nt555 225/40/18 with some tread left Stickers can be removed on request lol Attachment 20774 Attachment 20775 Dat flake tho Attachment 20776 Attachment 20777 Next up my grabber blue sc wheels. Been powdercoated and on the car for just a few months so also excellent condition. These wont be able to leave for about a week and will not come with tires. 200 for the set as well Attachment 20778 Attachment 20779 Attachment 20780 Attachment 20781 Black powdercoated valvecover, hasnt been installed since the powdercoating. 60 shipped SOLD! Attachment 20782 Attachment 20783 Hoosier drag radials and wheels combo. 225/60/16 hoosier dot. 8" wide wheels unknown brand and weight. About 20 passes on them light burnouts. I managed 1.8 second 60fts maybe you could do better :) 240 for the set. Attachment 20784 Attachment 20785 Attachment 20786 Git sum Attachment 20787 Last, 2.8 and 2.7 pulleys for the multiple pulley setup. Ottp brand. 2.7" has 6000 miles 2.7 has 25ish thousand miles. 40 bucks a pulley Attachment 20788 |
I literally just came inside from spray painting a spare valve cover I just bought. -_- I would have snatched this up in a heart beat.
GLWS, but also means you're getting new wheels, so I'm excited for you. ;) |
Haha thanks man too bad for you
|
How much did it cost to get the rims powder coated? I like the anthracite metallic but I dont want to go up to 18 from my 17.
|
around 300 bucks, depends where you take it can range from say 270 to 500
|
What your selling the blue wheels
|
Would the vavle cover fit a 2.4?
|
No
|
the valve cover will fit the following engines:
lsj 2.0 supercharged 198ci fuel injected dual overhead cam ecotec all I-4 engines from 2004-2007 that came in the supercharged cobalts and ions |
c'mon....
|
Rice, was the valve cover powder coated at low temp?
This isnt one of your crazy gutted ones is it? I may want to buy it from you. Let me know. |
400 degrees for approx 10 minutes
|
Originally Posted by riceburner
(Post 7382161)
400 degrees for approx 10 minutes
Is the coating mint? There looks to be an orange peel texture going on. might just be the lighting? |
1 Attachment(s)
it does have a bit of a texture to it for sure; but it is really glossy and really hasn't been touched since it was done.
Attachment 20702 |
Originally Posted by riceburner
(Post 7382167)
it does have a bit of a texture to it for sure; but it is really glossy and really hasn't been touched since it was done.
I'll take it. PM me your paypal, and I'll shoot you the cash. |
Valvecover sold to the babysitter^
|
Post added to op
|
Oh and heres how the zzp longtube setup sounds as of last month anyway. With a 2.5" zzp catback
Cobalt SS/SC Cams & Ported Head pull 0-120: |
are you running a new exhaust setup?
|
no same one lol, just got a different dp with less restrictive cat didn't feel like using the new header
|
oh ok cool. thought you were selling the whole thing for a nice turbo setup ;)
|
Would you sell just the downpipe?
|
Originally Posted by riceburner
(Post 7382172)
Valvecover sold to the babysitter^
|
Thank you!
|
Merning bermp
|
All times are GMT -4. The time now is 10:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands