Kolt

Looking for a factory lnf cat back exhaust cheap. I have collected some exhaust pieces, tips, and acquired a set of z06 c6 corvette mufflers with the integrated cutout. I don't want to hack up my factory exhaust if this project doesn't work out like I want so I want a sacrificial one. Would prefer as cheap as possible shipped to 38301. The part I need most is from the cat to the muffler. Lemme know what you got, and if your within 3 hours of 38301/38305 I can pick up as well.

Also if anyone knows if other trims exhausts will work lemme know please.

cluelessk

Why would you go through the effort of building exhaust with stock pieces?

Kolt

Its cheap, I have a mig and tig machine, and it just takes some elbow grease. I don't have the money to throw down on a quality aftermarket stainless system but working at a dealer I have acquired a lot of factory stainless 3-4in exhaust piping, tips, and a set of corvette mufflers. Its def not gonna be a "mirror underbody" show car with it pieced together like that but I don't care. If I can help it I wont use any of the old system, maybe only the part above the rear axle, but mostly I need it as a template off car so I don't have to store the car until its done.

cluelessk

Ah thought you were going to get a shop to build it.

If you can do it yourself it makes tons of sense. Sounds interesting.

Kolt

No lol, wouldn't be worth it then. I never thought about it but is a ls/lt coupe or sedan exhaust the same as far as the rear part around the axle and fuel tank? I know the muffler is different and it may be a smaller diameter but in theory it should be routed the same and use the same hangers right?

Slowbalt2000

iTrader: (1)

base model exhaust is 1 7/8" diameter lol

Kolt

eww

ECaulk

iTrader: (6)

Run a triple

07blackg5

iTrader: (8)

Im about to run some fake zoomies out of my trunk lid

Kolt

zoomies?

Slowbalt2000

iTrader: (1)

Kolt

bump

Kolt

Bump. Someone find a ss in the junkyard and cut me off the part over the rear axle?

Kolt