Looking for new wheels.
#1
Senior Member
Thread Starter
Looking for new wheels.
Hey Everyone,
I'm abit confused on new rims.
Tirerack.com seems to say my car has factor 18" Rims. But when I measure them with a measuring tape they measure out to 19 1/2 " diameter.
Also, different rims talk about diffrent offsets. What offset is the factory ones?
Thanks
-Jonathan
I'm abit confused on new rims.
Tirerack.com seems to say my car has factor 18" Rims. But when I measure them with a measuring tape they measure out to 19 1/2 " diameter.
Also, different rims talk about diffrent offsets. What offset is the factory ones?
Thanks
-Jonathan
#2
Senior Member
iTrader: (1)
Join Date: 12-20-11
Location: Ottawa
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
your factory wheels should be 18x7 with a +42mm offset.
This has the information you need: https://www.cobaltss.net/forums/whee...-read-me-8149/
Enkei makes fairly good wheels that are a little wider and will fit well. Due to the 5x110 it's fairly difficult to find wheels.
This has the information you need: https://www.cobaltss.net/forums/whee...-read-me-8149/
Enkei makes fairly good wheels that are a little wider and will fit well. Due to the 5x110 it's fairly difficult to find wheels.
#3
Senior Member
Thread Starter
your factory wheels should be 18x7 with a +42mm offset.
This has the information you need: https://www.cobaltss.net/forums/whee...-read-me-8149/
Enkei makes fairly good wheels that are a little wider and will fit well. Due to the 5x110 it's fairly difficult to find wheels.
This has the information you need: https://www.cobaltss.net/forums/whee...-read-me-8149/
Enkei makes fairly good wheels that are a little wider and will fit well. Due to the 5x110 it's fairly difficult to find wheels.
Looking at Tirerack the common size seems to be 18x8 and some 18x7.5s. Wish it would let me sort by size. Would 18x8s work okay? Would I need a diff set of tires for them?What about different offsets? 40mm seems to be the most common. YOu'd think Tirerack would have a way to check JUST the one size you need, or have a waytoput in what size options you want and that way you woudln't have to sift through all their 18" wheel sizes.
#4
Senior Member
iTrader: (13)
check out some other sites like thm motorsports they are a vendor on here and sell enkeis. also look at msr wheels they sell 17s and 18s for our cars and discountiredirect.com also has a nice selection. the common wheel for our cars are the 18x8 for aftermarket with an offset of 40 or 42
#5
Senior Member
Thread Starter
Originally Posted by Thm motorsports webpage search function
Wheels & Tires Products for: 2006 CHEVROLET COBALT SS 4Cyl 2.0L Supercharged
Sorry, There are No Products to Show.
Sorry, There are No Products to Show.
just Wow
#7
Senior Member
Thread Starter
I wonder though,
If I should just start a new thread call it "Attention CSS Vendors" and then post what I'm looking for and see what offers I get.
Last edited by insylem; 12-10-2014 at 12:34 PM.
#10
well that shouldn't matter too much. you can go to an 18x7.5 or even 18x8. You will just need some wider tires unless you dont mind some stretch.
#13
Senior Member
Thread Starter
#14
Senior Member
Thread Starter
I hope I have the clearence in the wheel well though. I have the GM Perforamnce Competitave knuckles, and those lowered me about 1/2" to 1" in the front.
#16
Senior Member
Thread Starter
I found another spec called Backspace..
Custom Wheel Fitments - Turk T | Tire Rack
Apperently backspace = (Width/2) + Offset
Custom Wheel Fitments - Turk T | Tire Rack
Apperently backspace = (Width/2) + Offset
#17
mind you, this was all LNF research I found so I cannot speculate on the LSJ
#19
Senior Member
Thread Starter
https://www.cobaltss.net/forums/tire_rim_calculator.php
IT tells me that I'll have just less then 1/2" clearance less then what I have now. So I checked and I DO have the room for it. So looks like 18x8s it is.
THanks
Now to find some good Rims/ Tires. Any reccomendations?
#20
Senior Member
Thread Starter
Ok so I Just turned the steering all the way to the stop. I used this tool
https://www.cobaltss.net/forums/tire_rim_calculator.php
IT tells me that I'll have just less then 1/2" clearance less then what I have now. So I checked and I DO have the room for it. So looks like 18x8s it is.
THanks
Now to find some good Rims/ Tires. Any reccomendations?
https://www.cobaltss.net/forums/tire_rim_calculator.php
IT tells me that I'll have just less then 1/2" clearance less then what I have now. So I checked and I DO have the room for it. So looks like 18x8s it is.
THanks
Now to find some good Rims/ Tires. Any reccomendations?
Should be here in a week or so.
Here is what I went with
http://www.tirerack.com/wheels/Wheel...All&sort=Brand
WIth these tires
http://www.tirerack.com/tires/tires....tnum=345VR8SAS
#21
Senior Member
iTrader: (3)
those are the wheels Staged07 has, his are just black.
you can see his car here on his new springs. https://www.cobaltss.net/forums/susp...prings-314475/
you can see his car here on his new springs. https://www.cobaltss.net/forums/susp...prings-314475/