Cobalt SS Network
Share Your Pictures with Our Community. Upload Now
0 2022/03/01 21:51:58
0 2022/02/28 15:44:33
0 2022/02/25 16:14:47
0 2022/02/25 12:58:23
0 2022/02/23 14:09:56
0 2022/02/23 14:09:50
0 2022/02/23 14:09:45
0 2022/02/23 14:09:39
0 2022/02/23 14:09:33
Thank God i forgot to put in this baffle. The rtv i put on had almost no contact with the engine block. It would have leaked terribly. Its all back together now, and should be oil tight
Thank God i forgot to put in this baffle. The rtv i put on had almost no contact with the engine block. It would have leaked terribly. Its all back together now, and should be oil tight
0 2022/02/22 20:37:03
Here is my ghetto oil cooler block. It will interfere with the coolant pipe, but i am trying to come up with a plan either way. I have a dual pass radiator, and it seems silly to have the coolant do a 360 around the engine for convenience sake. Thee $10 ebay bit and tap worked a treat, and i have about $25 into this altogether. Not too much time either
Here is my ghetto oil cooler block. It will interfere with the coolant pipe, but i am trying to come up with a plan either way. I have a dual pass radiator, and it seems silly to have the coolant do a 360 around the engine for convenience sake. Thee $10 ebay bit and tap worked a treat, and i have about $25 into this altogether. Not too much time either
0 2022/02/22 20:36:47
Here is a frame from the video. Also the car does have a twm short shift kit. Which is why I ask about 4th gear.
Here is a frame from the video. Also the car does have a twm short shift kit. Which is why I ask about 4th gear.
0 2022/02/21 14:32:13
Advertisement
0 2022/02/21 13:52:08
0 2022/02/21 13:51:43
0 2022/02/20 16:47:46
0 2022/02/20 11:12:53
The revised pan is on, after the paint mostly dried. The RTV is curing now
The revised pan is on, after the paint mostly dried. The RTV is curing now
0 2022/02/19 21:39:42
Since I am doing this on a bit of a budget, I am modifying the stock oil cooler block. It will be tapped for 1/2" npt, then adapted to an external air to oil cooler
Since I am doing this on a bit of a budget, I am modifying the stock oil cooler block. It will be tapped for 1/2" npt, then adapted to an external air to oil cooler
0 2022/02/19 21:39:21
0 2022/02/18 17:27:44
The pan in its final form. Unfortunately, it is around the same capacity as stock. I was hoping for more, but the crossmember is in the way
The pan in its final form. Unfortunately, it is around the same capacity as stock. I was hoping for more, but the crossmember is in the way
0 2022/02/18 09:03:56
0 2022/02/17 20:02:08
0 2022/02/17 20:02:05
0 2022/02/17 15:25:11
0 2022/02/17 15:25:00
0 2022/02/17 15:24:50
0 2022/02/17 08:47:58
0 2022/02/16 14:13:35
0 2022/02/16 10:43:57
0 2022/02/14 17:09:05
0 2022/02/12 12:30:39
0 2022/02/12 12:30:31
0 2022/02/12 12:29:58
Advertisement