SS/SC Dyno Results
#1
Moderator Alumni
Thread Starter
SS/SC Dyno Results
I got my car dyno'd today at a local shop. I had two pulls done with A/F ratio.
The first pull was 3rd gear and the second pull was 4th gear. The pull in 4th gear was a little lower than the 3rd gear pull....
Here is the dyno sheet.
The first pull was 3rd gear and the second pull was 4th gear. The pull in 4th gear was a little lower than the 3rd gear pull....
Here is the dyno sheet.
#2
Moderator Alumni
Thread Starter
I also talked with Mike at the shop who I might be working with to get a header back exhaust system. We also talked about maybe a smaller pulley and piggy back fuel mgt system, but one step at a time
#9
Very nice numbers. Seems that most owners are pulling between 205-215HP and 180-200ft/lbs of torque. Impressive to say the least, especially considering the stock rating of 205 at the crank
Of course over on the JBO, anything that anyone posts about Cobalts always ends in a flame war. Somebody posted dyno numbers similar to yours, and this jackass know-it-all named GoodwrenchGT responded claiming that Dyno's aren't at all accurate and their HP numbers can't be trusted
So much for that "conspiracy theory"
Of course over on the JBO, anything that anyone posts about Cobalts always ends in a flame war. Somebody posted dyno numbers similar to yours, and this jackass know-it-all named GoodwrenchGT responded claiming that Dyno's aren't at all accurate and their HP numbers can't be trusted
So much for that "conspiracy theory"
#11
Senior Member
Join Date: 04-11-04
Location: patterson, ca
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
thats sweet 212 thats awsome, hate the tq number those should have been 220tq or more. damn chevy messed up, always produced higher tq numbered cars but now they put higher hp. damn. oh well. still awsome none the less.
#13
Moderator Alumni
Thread Starter
I was looking at the autotap data for my 4th gear pull and it was topped out at 140 mph in 4th gear at the red line. So 5th gear is there to get me my extra 7 mph ? Seems a bit odd.
5th gear must just be for gas milage? I dunno...
5th gear must just be for gas milage? I dunno...
#15
Premium Member
Join Date: 02-23-05
Location: Florida
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
5th gear must just be for gas milage? I dunno...
#16
Originally Posted by mken
Remember, it's drag-limited. So yeah, 5th gear is just overdrive and isn't going to add much. I just wonder how fast it could go without that wing on the back...
#18
Junior Member
Join Date: 04-13-05
Location: Lexington, KY
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Could someone explain to me the difference in doing a dyno in 3rd and 4th gear? Is one supposed to be more accurate or standardized than the other? Who ever really gets on the gas hard in 4th gear anyway?
#19
Senior Member
Join Date: 04-13-05
Location: Toronto, Canada
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stic5
Could someone explain to me the difference in doing a dyno in 3rd and 4th gear? Is one supposed to be more accurate or standardized than the other? Who ever really gets on the gas hard in 4th gear anyway?
#20
Moderator Alumni
Thread Starter
Well when you dyno you want a perfect 1:1 gear ratio. Now that isn't going to happen on all cars and the dyno can account for that mathmatically but it's not as good as true 1:1.
The SS/SC transmission is 1.18:1 in 3rd and 0.89:1 in 4th. So your kinda on either side of 1:1. I did both so we could all see how it works out. The other dyno on the board from mondern performance is 3rd gear only. Some people feel that 3rd gear gives an optimistic number for horsepower and 4th would be a better accounting of the engine power (mostly because it's very close 1:1 in other cars ie. 4th is 0.98:1 on the getrag 5 spd)
I think it's safe to say that the actual horsepower sits between 203 and 212 HP on my car.
The SS/SC transmission is 1.18:1 in 3rd and 0.89:1 in 4th. So your kinda on either side of 1:1. I did both so we could all see how it works out. The other dyno on the board from mondern performance is 3rd gear only. Some people feel that 3rd gear gives an optimistic number for horsepower and 4th would be a better accounting of the engine power (mostly because it's very close 1:1 in other cars ie. 4th is 0.98:1 on the getrag 5 spd)
I think it's safe to say that the actual horsepower sits between 203 and 212 HP on my car.
#23
Senior Member
Join Date: 01-21-05
Location: Calgary, Alberta, Canada
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by wesmanw02
Somebody posted dyno numbers similar to yours, and this jackass know-it-all named GoodwrenchGT responded claiming that Dyno's aren't at all accurate and their HP numbers can't be trusted
even still if we are all dynoing the same "range" of HP, theres got to be truth to it. Even this goodwrenchGT has to believe it. There is no possible way that all dynos are going to be out that much from each other.
Im dynoing on the 11th, i'll post mine
#25
i dynoed at dynolab in marieta GA on a dynojet dyno. I did a 4th gear pul and 232 whp and 197wtq. I tried to post the graph, but it says the file is too large.. BTW those numbers ARE CORRECTED!!!!! the outside air temp was 81 and only had one big fan in front of the car. I did let it set for an hour with ice bags on the S/C and the top and side of the engine.