2.0L LSJ Performance Tech 205hp Supercharged SS tuner version. 200 lb-ft of torque.

meth problem

Thread Tools
 
Search this Thread
 
Old Sep 17, 2008 | 09:16 AM
  #1  
ifknrock09's Avatar
Thread Starter
Senior Member
 
Joined: 11-10-06
Posts: 594
Likes: 0
From: Avon/Danville, Indy
meth problem

ok so i went to the track last night and desided that i would give my car its last run for the year. i ran a 13.9 @ 103. not to bad. but as i was picking my ticket up from the booth my car started to misfire and stumble. i pull into the preping area where you can work on your car or whatever and popped the hood. while searching for a reason for the misfiring and stumbling i see that my 2 quart resevour that was full before my pass is now empty. i put my hand on the charger and it feels like a ice cube. then i look at the MAF computer for the meth and its smoking. has anyone ever had this happen? i am really confused. i plan on sending the computer to snow performance to see if they can tell me what took it out. but figured that i would ask everyone on here. thanks.

and i am pretty possitive that i happened after the run was over because that much meth going into the motor down the track would have caused the stumbling effect while i was making my pass. plus i would have been blowing alot of smoke and my buddy that i beat (srt4 whoop) said i wasn't blowing any. but after it started messing up it was.
Reply
Old Sep 17, 2008 | 09:19 AM
  #2  
Kibosh3's Avatar
Senior Member
 
Joined: 06-13-07
Posts: 1,161
Likes: 0
From: Woodbridge, ON
...thats why i made an led indicator inside my car...lets me know when it sprays...good luck with everything tho, bud
Reply
Old Sep 17, 2008 | 09:20 AM
  #3  
brett5's Avatar
Senior Member
 
Joined: 04-01-07
Posts: 522
Likes: 0
From: reading,pa
what? so you leaking meth into your blower is what your saying?
Reply
Old Sep 17, 2008 | 09:20 AM
  #4  
shsballa023's Avatar
Senior Member
 
Joined: 11-25-07
Posts: 1,574
Likes: 0
From: Iowa
Ya know they have rehab centers for meth problems
Have you checked all the lines over make sure everything is connected and sealed?
Reply
Old Sep 17, 2008 | 09:21 AM
  #5  
brett5's Avatar
Senior Member
 
Joined: 04-01-07
Posts: 522
Likes: 0
From: reading,pa
does the pump stay on? do you have a check valve?
Reply
Old Sep 18, 2008 | 08:36 AM
  #6  
ifknrock09's Avatar
Thread Starter
Senior Member
 
Joined: 11-10-06
Posts: 594
Likes: 0
From: Avon/Danville, Indy
ok. basically what happened was the computer for the meth went ape ****. and when that happened it sent power to the pump and solenoid and the pump pumped all 2 quarts into my motor. there was smoke coming out of the computer so i know that was the problem. plus the computer smells fried.
Reply
Old Sep 18, 2008 | 03:45 PM
  #7  
hungryhip-ccp's Avatar
Senior Member
iTrader: (2)
 
Joined: 05-31-07
Posts: 4,339
Likes: 0
From: SoCal, Lancaster
so you made a thread to answer your own question???? j/p
Reply
Old Sep 18, 2008 | 04:30 PM
  #8  
ifknrock09's Avatar
Thread Starter
Senior Member
 
Joined: 11-10-06
Posts: 594
Likes: 0
From: Avon/Danville, Indy
Originally Posted by hungryhip-ccp
so you made a thread to answer your own question???? j/p
haha. well my main question is what would have taken that computer out and has anyone had that problem.
Reply
Old Sep 18, 2008 | 04:30 PM
  #9  
07MONTECARLO_SS's Avatar
Banned
 
Joined: 06-16-08
Posts: 644
Likes: 0
From: Racine
Meth problem, time for rehab.
Reply
Old Sep 18, 2008 | 04:32 PM
  #10  
Dead Zen's Avatar
Senior Member
 
Joined: 05-19-06
Posts: 6,982
Likes: 1
From: Beaver, PA (outside Pittsburgh)
.... off to the methadone clinic for you
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KMO43
Front Page News
33
Jan 12, 2016 12:01 AM
yellow dragon
Problems/Service/Maintenance
0
Sep 28, 2015 09:49 PM
goaliemo
2.0L LSJ Performance Tech
6
Sep 28, 2015 01:37 PM
KMO43
Featured Car Showcase
37
Sep 27, 2015 08:53 PM
Adiaz1ss
Problems/Service/Maintenance
4
Sep 26, 2015 11:51 PM




All times are GMT -4. The time now is 01:33 AM.