Please help me, I am installing megans coilovers. I started on the front, and I managed to get all the bolts off exept for the stabilizer bar. The bolt and the nut are both spinning inside the body. Am I screwed?

 

put a jack under the control arm to load the suspension / droplink and use an impact gun try that.

 

Use a 17mm or adjustable wrench or pliers to hold the stud(right by the rubber boot)

 

We had to use some vice grips to hold the stud.

 

thanks I'll try that

well the vice grips worked for a bit, and now the part behind the rubber boot is worn down. Damn its so close. I'm letting it soak in penitrating oil right now. Any other ideas?

YAAAAAAAY! I got one side off. Now for the other. Thanks guys

 

css.net ftw again

 

ok so I got the coilovers in, and I took it for a drive and there is some crazy nocking coming from the front end when I let off the gas or brake. Anyone know what that could be?

 

Megan Coilovers.



It could be a bolt loose, or the upper plate.

 

I'm going to jack it up tomorow and check all the bolts, but I'm pretty sure that they were all on good. I noticed when I was going about 40 kph the car was going up and down, like I was going over a bunch of little speed bumps.

 

Megan quality. You got to pay to play, and Megan isn't paying.

 

wow thats embarassing, two of my wheel nuts were loose on my front driver wheel

 

BWAHAHA

sorry.. that was just funny

How do they ride?

 

yeah I had a good laugh too, and of all the things to forget too. I was so drained after that. It took me 11 hrs to do that job, mostly because those stabilizer bolts were being a pain in the ass, but I got it done anyway, and they ride awsome. Thanks for the help guys