Sold my SS/SC and this is whats left . I take paypal , and would rather not ship to canada . Thanks for looking

GMPP touring exhaust 9K miles, no winters, comes with an angles tip . SOLD

XTC 2.5" Catted DP 4K miles , never set a code (has the used gaskets and new bolts) ... SOLD

GMPP Extrune Honed manifold ,Comes with new gasket SOLD

GMPP Stage 3 pulley SOLD

I also have a bit for the blue stage bolts 3/8 drive. sold



1 USED GMPP straight cut w/clamp 25+shipping

1 USED GMPP angled tip W/ no clamp 20+ shipping
(Both need to be polished)

 

BUMP for good stuff

 

this downpipe. it bolts up to stock header? i dont have a stock header, i have the CA v1 header but its the same size and everything

 

You've got mail.

 

dibs on the straight tip, shipping to 77520?

 

It should bolt up no problem. This is the downpipe CA sells for a shorty header. If you have a stock downpipe now this is a direct replacement. I'm pretty sure the CA V1 will bolt on to the factory DP so it should be a perfect fit.

 

Manifold and DP are sold

 

Bump

The Stage 3 pulley will produce 16-16.5 lbs of boost and is dealer friendly. I had my car in many times and they never could tell. It boost way quicker and earlier than the stg2 pulley , and isn't as hard on the injectors as a true 2.9. Iat2's weren't bad at all either

 

Can you do any better on the Stage 3 pully by chance?

 

Throw me an offer. This little bastard was expensive (CED wants 125) but i wanted it to look exact for dealer purposes . .

 

Just the GMPP tips left ///Don't be afraid to throw me an offer