what is the smallest pulley you can run on stock injectors??

 

i think the 3.0 but im not for sure!!!

 

I wouldnt go smaller than stock pulley on the stock injectors

 

yea the stock injectors are close to maxed out on the stock pully but with the right tune you can pull it off i know its been done befor idk how reliable it is tho

 

thanks for input

bump for more suggestions

 

Sorri but what if i put 42lb injectors on stock pulley how would that run

 

Unless you got a tune for it, really shitty...

 

You can run a 3.0 pulley on stock injectors with a good tune. That's how I started with the car.

There's no real point to running the stock pulley with 42's. No benefits to be had. And if untuned, you will lose power and stress the motor

 

thanks for the input

 

Sure thing

 

i was reading on zzp and it says that you can only run a 3.25 on the stock injectors?

 

They have their opinion. I have mine. I ran a 3.0 on stock injectors and was pulling high IDC's, 90%. So you should stick to a 3.2 or 3.1 but you asked if 3.0 would work, and in my case, it worked great. I pulled on my buddy with GMstage1+2.9

well you asked what the smallest on stock injectors is. The 3.2 can be untuned

 

ok great thanks again