View Full Version : Fidanza Flywheel GB Cobalt SS and 2.2L/2.4L!!


NGASales
01-03-2007, 02:56 PM
We are going to offer this flywheel for both the 2.2L and the SS.

Part #198201 Cobalt SS
Part #198281 Cobalt 2.2L
Part #198211 Cobalt 2.4:

These will have to be ordered directly from Fidanza so we will need a min of 10 to get this price.

After the 10 it will be a 7-20 day turn time in order to place the order and then ship them out.

Fidanza Flywheels are made using the most modern materials available. They are constructed from either CNC Machined 6061 T6 or 2024 T3 Aluminum, depending on model. All materials are tempered aluminum, which is a very, very strong yet very lightweight material. The replaceable friction surface, however, is made of 1050 High Carbon, Alloy Steel. This friction material is incredibly durable allowing the user to use just about any clutch disc material available, from organic to Kevlar and even sintered iron. Fidanza attaches the friction surface using aerospace quality nuts and bolts or stainless steel, depending on the application. These fasteners are some of the best that money can buy and are chosen for their sheer strength and resistance to corrosion and fatigue. All ring gears are heat treated for durability and are heated, pressed on, and then secured using grade 10 fasteners. Fidanza Flywheels reduce the moment of inertia characteristics on an engine, thereby increasing useable power to the wheels. Using a Fidanza aluminum flywheel not only offers dramatic increases in useable power, but can also potentially extend engine life by reducing the stress on the crankshaft and main bearings.

Price is 300.00 shipped.

If your interested let me know.

This will be available in the next few hours on our site.

www.ngamotorsports.com

UpOnGaMe
01-03-2007, 03:24 PM
so we only have a few hours to decided?

NGASales
01-03-2007, 03:35 PM
No, It will be a few hours till I have it up on the site :)

It will be good for the next month.

UpOnGaMe
01-03-2007, 03:50 PM
o ok thanks, i am waiting on the dynos from the cams to make my decision.

Joewit
01-03-2007, 04:30 PM
hmmm, might wanna get in on this

BluetoGreyIonDriver
01-03-2007, 09:23 PM
ok this might seem stupid, but wil this work with an auto tranny?

g5mike
01-03-2007, 09:24 PM
since Im spending all this money on the dyno/tune ..do you guys want to pitch in together and buy me the flywheel.lol

UpOnGaMe
01-03-2007, 09:28 PM
i have 2 dollars on it.............., no wont work on auto tranny

sunfirejoe
01-03-2007, 09:57 PM
when does this run till maybe ill pick one up and new clutch again lol, its wicked price for sure

Allshot
01-03-2007, 09:59 PM
No, It will be a few hours till I have it up on the site :)

It will be good for the next month.

This is how long

sethallen
01-03-2007, 10:37 PM
would there be a point of getting this flywheel with my stock clutch? and how would the install be? (never done cluth/fw work before)

Listerman
01-03-2007, 11:28 PM
From what I saw on Fidanza's site the 2.0 weighs 8.5lbs and the 2.2/2.4 weighs 7.5lbs.

I do believe these are also two-piece flywheels.

NGASales
01-04-2007, 02:51 AM
This will last until at least the end of Jan, maybe longer.

If you want to do a flywheel clutch combo I might be able to work a deal with Spec.

xspyder85x
01-04-2007, 03:17 AM
yes, nga sales is very trustworthy. Thanks for the Intake!

montecarloman
01-18-2007, 11:25 PM
I'd definatly be interested

intense_SS
01-18-2007, 11:26 PM
is this for the 2.0?

VictoryRed06
01-18-2007, 11:28 PM
how much of a diff have these flywheels made?

montecarloman
01-19-2007, 07:27 PM
Last I heard the stock flywheel weights something like 15 to 20 Lbs. Fidanza's site says the 2.0 weighs 8.5lbs and the 2.2/2.4 weighs 7.5lbs. Dropping rotational weight from anywhere is huge, especially when its that much. I'm going to get one reguardless of a group buy or not, it would just be nice to get some $$ off.