General Cobalt General Cobalt, Pursuit, and Ion talk. Post specific discussions in the forums below

How Accurate is the Aeroforce Interceptor gauge?

Thread Tools
 
Search this Thread
 
Old Mar 15, 2007 | 10:26 PM
  #1  
Scoot05RedSS's Avatar
Thread Starter
Member
 
Joined: 04-30-06
Posts: 349
Likes: 0
From: Loranger, LA
How Accurate is the Aeroforce Interceptor gauge?

Mine has me running 13.1s at 109. Everytime I do my 1/4 it around 13.1-4 at 109-111. Is this accurate? I haven't been to the track since I got it to see if it's close. Also my max HP was 300.1. I know that's to the crank but is that accurate too? Anyway thanks!
Reply
Old Mar 16, 2007 | 08:26 AM
  #2  
SKDR112888's Avatar
Senior Member
 
Joined: 11-22-06
Posts: 944
Likes: 0
From: Owings Mills, Maryland
well I know the horse power can be adjusted I was messing around with mine and I got it to say I have like 7000 horse power, but with your mods your proboly ctually close to 300 at the crank,,

and as far as 1/4 miles ,I think its close but not too acturate, it start counting as soon as your go I think 60% throttle, whitch gives you a chance to start rolling =)
lol I dont know if its completly true but I think that s how it is I read the manual an I believe I reamember reading that soo. . .hope that helps
Reply
Old Mar 16, 2007 | 08:39 AM
  #3  
2006ArrivalBlueSS's Avatar
Senior Member
 
Joined: 07-24-05
Posts: 1,321
Likes: 0
From: GTA, Ontario
It's not that far off - the Aeroforce runs off the speedo and odometer readings so it does not take into consideration wheel spin and traction loss. If you ran with no wheel spin then I think the times would be pretty accurate.
Reply
Old Mar 16, 2007 | 08:48 AM
  #4  
chipmonk212121's Avatar
Senior Member
 
Joined: 01-23-06
Posts: 1,216
Likes: 0
From: Grant Park, Illinois
Originally Posted by SKDR112888
well I know the horse power can be adjusted I was messing around with mine and I got it to say I have like 7000 horse power, but with your mods your proboly ctually close to 300 at the crank,,

and as far as 1/4 miles ,I think its close but not too acturate, it start counting as soon as your go I think 60% throttle, whitch gives you a chance to start rolling =)
lol I dont know if its completly true but I think that s how it is I read the manual an I believe I reamember reading that soo. . .hope that helps
300 at the crank.....???? i woould probably say more like 260-275 at the wheels depending on the tune.
Reply
Old Mar 16, 2007 | 08:52 AM
  #5  
2006ArrivalBlueSS's Avatar
Senior Member
 
Joined: 07-24-05
Posts: 1,321
Likes: 0
From: GTA, Ontario
Originally Posted by chipmonk212121
300 at the crank.....???? i woould probably say more like 260-275 at the wheels depending on the tune.
With his set-up 300 bhp is not unrealistic - with 15% loss to the wheels that makes 255 whp which is bang on
Reply
Old Mar 17, 2007 | 04:21 PM
  #6  
Scoot05RedSS's Avatar
Thread Starter
Member
 
Joined: 04-30-06
Posts: 349
Likes: 0
From: Loranger, LA
Thanks guys, appreciate it. I ran a 13.4 car the other night and stayed practically door to door so I think it's pretty close but off a little. Above 120 he started pulling but he's turboed so he's suppose to!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sl0wbaltSS
2.0L LNF Performance Tech
18
Nov 21, 2018 11:11 PM
KMO43
Front Page News
33
Jan 12, 2016 12:01 AM
ineedacobaltss
Parts
16
Nov 7, 2015 02:25 PM
KMO43
Featured Car Showcase
37
Sep 27, 2015 08:53 PM
GBRunner24
Featured Car Showcase
3
Sep 26, 2015 06:44 PM




All times are GMT -4. The time now is 07:25 AM.