Help me finalize my build plans
Help me finalize my build plans
*Update 5 Jun
OK ladies and gentleman, I'm planning on building up my car to showcar quality. I plan on going with a smooth, simple, and flowing style instead of loud. Everything will be dark red, glossy black, or polished aluminum.
So this is what I'm looking at doing for the add ons. I would like some opinions, other options, etc. Stuff in Bold is already installed. Stuff in red I need a brand or help with.
Any suggestions in this area are greatly appreciated.
OK ladies and gentleman, I'm planning on building up my car to showcar quality. I plan on going with a smooth, simple, and flowing style instead of loud. Everything will be dark red, glossy black, or polished aluminum.
So this is what I'm looking at doing for the add ons. I would like some opinions, other options, etc. Stuff in Bold is already installed. Stuff in red I need a brand or help with.
Performance
GMPP Stage 2
GMPP Extruded Manifold
ZZP 3" Down Pipe w/ 2.5" connector, 02 Bung, and Cat
Innovate LC-1 Wideband Sensor - linked to Interceptor
GMPP Sport Exhaust
Custom Polished Pulley, 2.9" - from Nate
AEM CAI
1 step colder plugs, need a brand
Optima Yellow Top Battery
Sun Hyper Voltage System MR
Sun Hyper Ground System
LFP Dual Pass Cobra Heat Exchanger
GMPP Dual Pass End Plate w/ Surge Tank
Suspension/Brakes
DC Sport Strut Tower Bar - Painted Sport Red
Progress Rear Sway Bar - Painted Sport Red
TTR Engine - Polished with Red Bushing
TTR Transmission Mount Inserts
Intense Poly CAB
Eibach Sportlines
Koni Front & Rear Struts
Uneek Slotted Rotors
Paint Calibers Dark Red
EBC Redstuff Pads
Goodridge Steel Brake Lines
Centerline Storm Forged Rims - Hi-Polish, 18x7
Michelin Pilot Sport PS2 Tires
Appearance
PIAA Ultra White Headlight & Fog Bulbs
Painted Headlights - Black or Sport Red?
Vision Bulbs Xenon Interior Bulbs
Auto Meter LED Gauge Bulbs - Replace Tack and Speedo lights, Red
Hurst Shifter - Can you polish this thing?
MRZ Trim - Everything they make for the car but the strut bar
Ebony Armrest - I'm sticking my light controls and such in it
Lower Grill Insert
Polished Petals
35% Tint all around
AVS Trim - Window Shades, Aeroshades, Tailshades, Windflector
Sport Red Hoot/Trunk Struts
PIAA Super Silicone Wipers - Gloss Black
Shorty Antenna
Hose Techniques SVH Kit - Dark Red, Gloss Black, or mix?
Lloyd Premium Floor & Trunk Mats - Ebony with SS & Bowtie
Raptor Shift Light - Red LED & Black Case
Cobalt Dual Gauge Pod 2dr Full Pillar
Aeroforce Interceptor Gauge SS Edition - Red Lights, Black Face, Chrome Bezel
Streetglow Controllers with Red Neon and LED accent lighting - Controls in Armrest
GMPP Stage 2
GMPP Extruded Manifold
ZZP 3" Down Pipe w/ 2.5" connector, 02 Bung, and Cat
Innovate LC-1 Wideband Sensor - linked to Interceptor
GMPP Sport Exhaust
Custom Polished Pulley, 2.9" - from Nate
AEM CAI
1 step colder plugs, need a brand
Optima Yellow Top Battery
Sun Hyper Voltage System MR
Sun Hyper Ground System
LFP Dual Pass Cobra Heat Exchanger
GMPP Dual Pass End Plate w/ Surge Tank
Suspension/Brakes
DC Sport Strut Tower Bar - Painted Sport Red
Progress Rear Sway Bar - Painted Sport Red
TTR Engine - Polished with Red Bushing
TTR Transmission Mount Inserts
Intense Poly CAB
Eibach Sportlines
Koni Front & Rear Struts
Uneek Slotted Rotors
Paint Calibers Dark Red
EBC Redstuff Pads
Goodridge Steel Brake Lines
Centerline Storm Forged Rims - Hi-Polish, 18x7
Michelin Pilot Sport PS2 Tires
Appearance
PIAA Ultra White Headlight & Fog Bulbs
Painted Headlights - Black or Sport Red?
Vision Bulbs Xenon Interior Bulbs
Auto Meter LED Gauge Bulbs - Replace Tack and Speedo lights, Red
Hurst Shifter - Can you polish this thing?
MRZ Trim - Everything they make for the car but the strut bar
Ebony Armrest - I'm sticking my light controls and such in it
Lower Grill Insert
Polished Petals
35% Tint all around
AVS Trim - Window Shades, Aeroshades, Tailshades, Windflector
Sport Red Hoot/Trunk Struts
PIAA Super Silicone Wipers - Gloss Black
Shorty Antenna
Hose Techniques SVH Kit - Dark Red, Gloss Black, or mix?
Lloyd Premium Floor & Trunk Mats - Ebony with SS & Bowtie
Raptor Shift Light - Red LED & Black Case
Cobalt Dual Gauge Pod 2dr Full Pillar
Aeroforce Interceptor Gauge SS Edition - Red Lights, Black Face, Chrome Bezel
Streetglow Controllers with Red Neon and LED accent lighting - Controls in Armrest
Last edited by InfinityzeN; Jul 5, 2007 at 09:57 AM. Reason: Updated parts list
Yea, 3" exhaust is way to big for my target build level. And if my target shoots up sometime in the future, I can just put what I got on the wife's balt.
As for the Stiffy and TTR mount, are you sure that both can't be mounted? I'll go with just the TTR mount then, but it would seem that they shouldn't interfere with each other. And I know there are several people running mounts and the Stiffy. Plus I believe they each counter a different type of engine throw.
Can we get an answer from TTR?
As for the Stiffy and TTR mount, are you sure that both can't be mounted? I'll go with just the TTR mount then, but it would seem that they shouldn't interfere with each other. And I know there are several people running mounts and the Stiffy. Plus I believe they each counter a different type of engine throw.
Can we get an answer from TTR?
Right now I'm still in a toss up. It sorta comes down to "Cheap/Loud/Quality, pick two" and I'm already dumping money on all the other stuff, but some of the audio I want is anything but cheap.
For example, I'm looking at the Infill G4 w/ toys (XM, Nav, Car Diagnostics, rear view camera) as my head unit. Thats a $3k fully loaded computer system, looking at a pretty penny before we even get to amps and speakers.
Most likely I'll go with four 6.75" component speakers up front, four more ether 6.75" or 6x9" in the rear, two 4-channel amps to power them, a pair of JVC CS-BB2's under the front seats for some mid-low bass, and a pair of 10" subs in the drunk.
I'm thinking of using the Kenwood KFC-XW1000f subs (hey man, you know I like Kenwood), which are low profile carbon fiber subs, and mounting them each in a custom glass box in the sides of the trunk. The three amps on a custom rack mounted to the larger of the back seat panels.
For example, I'm looking at the Infill G4 w/ toys (XM, Nav, Car Diagnostics, rear view camera) as my head unit. Thats a $3k fully loaded computer system, looking at a pretty penny before we even get to amps and speakers.
Most likely I'll go with four 6.75" component speakers up front, four more ether 6.75" or 6x9" in the rear, two 4-channel amps to power them, a pair of JVC CS-BB2's under the front seats for some mid-low bass, and a pair of 10" subs in the drunk.
I'm thinking of using the Kenwood KFC-XW1000f subs (hey man, you know I like Kenwood), which are low profile carbon fiber subs, and mounting them each in a custom glass box in the sides of the trunk. The three amps on a custom rack mounted to the larger of the back seat panels.
Ok, lets see if I can help you out. I wanted completely indash, so that got most CarPCs tossed out of the running.
Where I'm buying it from
Other place to buy it
Its competitor
Story on Navigadget
GPS Lodge short
Where I'm buying it from
Other place to buy it
Its competitor
Story on Navigadget
GPS Lodge short
LSX RWD S/C conversion
iTrader: (2)
Joined: 03-25-05
Posts: 10,450
Likes: 277
From: Maple Ridge, BC, Canada
LSX RWD S/C conversion
iTrader: (2)
Joined: 03-25-05
Posts: 10,450
Likes: 277
From: Maple Ridge, BC, Canada
for all that id be more then happy to pay the current price
Last edited by EmperorJJ1; Jun 30, 2007 at 09:00 AM. Reason: Automerged Doublepost



