Alrite with my big project coming up this weekend i have arrived at my final missing piece....i'll need to relocate my MAF to the other side of the engine bay...so around 3-4ft of movement.

is there any type of PLUG and PLAY wire harness for the MAF on our car....specifically i need one for a cobalt (different shaped MAF's and different connector)

i know theres got to be something like this out there but i just cant find it....

please let me know if anybody has something like this...thanks!

another option if any one can confirm is this...just how long is the stock harness?

i looked at the list of parts in the TAG kit and there nothing on there about any type of MAF movement, ect....is the stock harness long enough to reach the other side of the engine?

 

Just snip it out like four or five inches from the connector, and crimp and seal a long section of wire if you have to. The stock wire is not long enough to reach.

 

how many wires head to the MAF? any ideas?

 

I think it was 6, but I don't remember.... but I'll be doing the same thing next week anyway

 

There are five wires so you can cut them and splice longer in or zzp sells a maf relocation plug and play harness for 29.99

 

zzp sells a extension harness

 

Um... He posted this in 07 lol... Long before zzp had hat haha

We were all using the torque dampener back then with poly trans bushings

 

way to bump a thread from the dead guys lol

 

first post is a 4 year old revival Winning!

Welcome to the forum!