hey guys does anyone have an extra stg 2 belt kicking around? i think i have a lil belt squeal so i was gonna change out the belt to see if it helped!

your squeal might actually be from the pulley not the belt.. put a little grease/oil on where the pulley meets up the with the motor.. fixed my squeal in my 92 GT..

what kind of grease?! i'll bring some to race city tonight if you could help me?!

Go and get some sylicone dry lube from a auto parts store spray it of and squeel is gone.

try kasios suggestion first.....

WD40 works...

and u just spray it on all the pulleys or just the one i think is sqeauling?

WD40 is OK.......but it attracts dust and it will be squealing again. Best thing to use is Gunk or a white paste grease.

I'm still running the stock belt with my 2.8" pulley. I changed out the 2.5" idler pulley for a 3.0" idler. This way, I never have to worry about finding a Stage 2 belt.

My nate pulley made some noise I would check your belt alignment. I had to pull the hub back off the end of the blower a bit compared to where the pulley was sitting with the stage 2 pulley.

its good now guys! thx for the help
i just used some of that silicone spray larry recomended and worked well!