2.0L LSJ Performance Tech 205hp Supercharged SS tuner version. 200 lb-ft of torque.

pulley swap??

Thread Tools
 
Search this Thread
 
Old Dec 5, 2005 | 02:14 PM
  #1  
BFEkid's Avatar
Thread Starter
New Member
 
Joined: 06-19-05
Posts: 68
Likes: 0
From: Festus, mo
pulley swap??

im lookin to go down to a 3 " pulley i know i will have to go a grade colder on the plugs but as for the computer is there anyway to run this pulley with out a check engine light comin on??
Reply
Old Dec 5, 2005 | 03:24 PM
  #2  
BlAckOnBLaCK's Avatar
Junior Member
 
Joined: 10-05-05
Posts: 421
Likes: 0
From: Chicago
I think that most people are running with stock plugs and are not having any CEL. I am running it without any CEL and I have the stock plugs in.
Reply
Old Dec 5, 2005 | 03:30 PM
  #3  
silverSS's Avatar
Banned
 
Joined: 05-01-05
Posts: 3,628
Likes: 0
From: USA
how long have u had it, and how does it run, which one are you using? pulley tech?

i am also considering a 3.0, ive seen alot of redlines run the 3inch with nothing else and just stock and be fine.
Reply
Old Dec 5, 2005 | 03:46 PM
  #4  
Chevypowered's Avatar
Senior Member
 
Joined: 06-05-05
Posts: 2,303
Likes: 0
From: Fort Collins, CO
I have had mine on for atleast 1000 miles maybe a month and a half to 2 months. No Cel's i also have fujita intake. The pully is really nice if you live at higher elevation. i have the stock plugs.
Reply
Old Dec 5, 2005 | 05:58 PM
  #5  
ss_mike's Avatar
New Member
 
Joined: 11-11-05
Posts: 61
Likes: 0
From: indianapolis,in
what pully is everyone running?
Reply
Old Dec 5, 2005 | 06:03 PM
  #6  
carbombss's Avatar
Senior Member
 
Joined: 04-28-05
Posts: 1,726
Likes: 0
From: baltimore md
3.25 dub hub asm
Reply
Old Dec 5, 2005 | 06:15 PM
  #7  
Chevypowered's Avatar
Senior Member
 
Joined: 06-05-05
Posts: 2,303
Likes: 0
From: Fort Collins, CO
3" pulley off of ebay
Reply
Old Dec 5, 2005 | 06:36 PM
  #8  
MOD MONEY's Avatar
Member
 
Joined: 09-22-05
Posts: 258
Likes: 0
From: S.C.
2.8 dub with psi fi powerpaq. didnt someone post about a small explosion in low rpms when dynoed with only just a small pulley.
Reply
Old Dec 7, 2005 | 01:18 AM
  #9  
BFEkid's Avatar
Thread Starter
New Member
 
Joined: 06-19-05
Posts: 68
Likes: 0
From: Festus, mo
ok no cels for 10k miles is what i have seen the best of and no plug change sounds good but around here its humid and not high altitude.. and what about the tensioner??
Reply
Old Dec 7, 2005 | 09:32 PM
  #10  
BFEkid's Avatar
Thread Starter
New Member
 
Joined: 06-19-05
Posts: 68
Likes: 0
From: Festus, mo
sweet any really cheap mods i can include if i do a pulley swap or any free mods lol
Reply
Old Dec 7, 2005 | 09:45 PM
  #11  
Dman's Avatar
Senior Member
 
Joined: 10-20-04
Posts: 1,307
Likes: 0
From: USaaayyyy
you need to go with a step colder plugs when going smaller than a 3.0 pulley just to be safe.
Reply
Old Dec 7, 2005 | 09:47 PM
  #12  
Darksun's Avatar
Senior Member
 
Joined: 06-04-05
Posts: 2,040
Likes: 0
From: LongIsland
yup welfare airbox mod. take off bottom cover to stock air box and zip tie the stock filter up into air box.
Reply
Old Dec 8, 2005 | 02:24 AM
  #13  
silverSS's Avatar
Banned
 
Joined: 05-01-05
Posts: 3,628
Likes: 0
From: USA
can i run a step colder plugs with the pulley tech 3.0pulley? what would this help by running the one step colder plugs on a 3.0?

and what boost are you seeing with the 3.25 SFPH?

what is out stock size (just to make sure)
Reply
Old Dec 8, 2005 | 10:01 AM
  #14  
Darksun's Avatar
Senior Member
 
Joined: 06-04-05
Posts: 2,040
Likes: 0
From: LongIsland
Originally Posted by silverSS
can i run a step colder plugs with the pulley tech 3.0pulley? what would this help by running the one step colder plugs on a 3.0?

and what boost are you seeing with the 3.25 SFPH?

what is out stock size (just to make sure)
um Jmc007 has a thread where he tested it out here:
https://www.cobaltss.net/forums/2-0l-lsj-performance-tech-47/3-0-pulley-technology-pulley-dyno-results-5914/
Pretty good stuff in there. Um basically with the 3.0 you don't have to change plugs i think a redline owner clownhair tested that and concurs.
Reply
Old Dec 8, 2005 | 10:30 PM
  #15  
BFEkid's Avatar
Thread Starter
New Member
 
Joined: 06-19-05
Posts: 68
Likes: 0
From: Festus, mo
im gona run the 3.0 pulley but after im done with the car im hoping to push 10 psi
Reply
Old Dec 8, 2005 | 11:13 PM
  #16  
carbombss's Avatar
Senior Member
 
Joined: 04-28-05
Posts: 1,726
Likes: 0
From: baltimore md
Originally Posted by silverSS
can i run a step colder plugs with the pulley tech 3.0pulley? what would this help by running the one step colder plugs on a 3.0?

and what boost are you seeing with the 3.25 SFPH?

what is out stock size (just to make sure)


bout 15psi at wot

stock is bout 3.50
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jesse
Parts
22
Oct 20, 2015 09:56 PM
SSLOW06
Complete Cars
1
Oct 1, 2015 07:21 PM
patooyee
Wanted - What to buy - All categories
0
Oct 1, 2015 01:07 PM
Jesse
General Cobalt
2
Sep 30, 2015 07:22 AM
ChrisTutoki
Parts
0
Sep 24, 2015 08:39 PM




All times are GMT -4. The time now is 10:47 AM.