Mark this thread as Unsold
For Sale garage cleanout sale
08-16-2015, 06:36 AM
#176
ok cool deal man, I"ll put up the pics this afternoon as I still have a few hours left of work on the balt to knock out this morning. hoping to be done today. need to get the bit to drill out the oil pan as apparently I have every size but that one (59/64 or 15/16)
08-17-2015, 06:17 PM
#181
Ah damn it they want "re-stocking" fee that + return shipping makes it not worth returning .Really Sorry yours is a better header too I'd rather have it
I'll try to sell it if I can sell mine before you sell yours I'll buy it ok
I'll try to sell it if I can sell mine before you sell yours I'll buy it ok
Last edited by Watts-Up; 08-17-2015 at 09:06 PM.
08-21-2015, 06:55 AM
#183
pulley and hub are sold. have a few spare pullies laying around though
2.55 zzp pulley
a bunch of stage II gm pullies
a 2.85 pulley for a stage II hub
I have a stock clutch with about 38k miles on
a spec stage II but that needs a new disc w/fidenza flywheel that needs a new wear ring. Pressure plate has some heat marks as my slave went out and I drove the car for about 1.5 months with no clutch (so much fun in NYC) but it's in decent shape, flywheel took most of the beating on that
random stock brake parts with some decent miles on them
have 3 lsd diffs from g85 trans, 2 in great shape but will need new final drive gears as both have chipped teeth (1 is still in a trans but I could pull it, might have a bit of surface rust but still functional)
looking for $250 + shipping for each of those
have some cooling stuff left over, I think James is taking the ZZP stealth
also have a stage IV ctsv front mount. does require some cutting to make it fit, but it holds over a gallon of coolant and does quite a good job at getting rid of heat
2 AEM digital coolant temp gauges that read from 0-150 that I used on the inlet and outlet of the intake manifold to see temp rise and make sure system was functioning properly.
still have a bunch of honda parts for a k20 crx swap if anyone knows anyone looking for that.
5 speed trans axles charge harness and shifter box
also have some fd rx-7 parts I need to get rid of too. 99 spec turbo's for non sequential use, cusco strut bar, stock 93 computer, driver side JDM spec tail light (round lights) etc
have some LS parts also (as in lsx) 5.3 heads, truck intake mani w/injectors and rails, stock f-body fans
stock 98 computer w/engine harness
2.55 zzp pulley
a bunch of stage II gm pullies
a 2.85 pulley for a stage II hub
I have a stock clutch with about 38k miles on
a spec stage II but that needs a new disc w/fidenza flywheel that needs a new wear ring. Pressure plate has some heat marks as my slave went out and I drove the car for about 1.5 months with no clutch (so much fun in NYC) but it's in decent shape, flywheel took most of the beating on that
random stock brake parts with some decent miles on them
have 3 lsd diffs from g85 trans, 2 in great shape but will need new final drive gears as both have chipped teeth (1 is still in a trans but I could pull it, might have a bit of surface rust but still functional)
looking for $250 + shipping for each of those
have some cooling stuff left over, I think James is taking the ZZP stealth
also have a stage IV ctsv front mount. does require some cutting to make it fit, but it holds over a gallon of coolant and does quite a good job at getting rid of heat
2 AEM digital coolant temp gauges that read from 0-150 that I used on the inlet and outlet of the intake manifold to see temp rise and make sure system was functioning properly.
still have a bunch of honda parts for a k20 crx swap if anyone knows anyone looking for that.
5 speed trans axles charge harness and shifter box
also have some fd rx-7 parts I need to get rid of too. 99 spec turbo's for non sequential use, cusco strut bar, stock 93 computer, driver side JDM spec tail light (round lights) etc
have some LS parts also (as in lsx) 5.3 heads, truck intake mani w/injectors and rails, stock f-body fans
stock 98 computer w/engine harness
09-02-2015, 11:28 AM
#196
header back up for sale
$275 shipped
link for new
http://www.summitracing.com/parts/vp...FYOPHwod7QEN_A
$275 shipped
link for new
http://www.summitracing.com/parts/vp...FYOPHwod7QEN_A
09-03-2015, 10:17 AM
#198
even for an old geezer like me? figured I've been on here long enough and have a good enough feedback lol. sold well over a 100 items on here over the last 9 years with out an issue
will do whenever I get a chance to take more pictures of the stuff.
will do whenever I get a chance to take more pictures of the stuff.
