Want to buy exhaust system from clear image.
Want to buy exhaust system from clear image.
Honestly, not going to lie,
total noob with exhausts.
I want the full system,
what do i need? how much?
( car = 2.2 L 5 speed 2006 Cobalt LS sedan )
I also want to purchase a trifecta tune.
total noob with exhausts.
I want the full system,
what do i need? how much?
( car = 2.2 L 5 speed 2006 Cobalt LS sedan )
I also want to purchase a trifecta tune.
it should bolt right up if you buy a complete system.
OR you can go to an exhaust shop and get them to make you one and just add whatever muffler you want. Thats what I did. I have 2.25 in piping (dont go any bigger than that) with a magnaflow straight through muffler.
OR you can go to an exhaust shop and get them to make you one and just add whatever muffler you want. Thats what I did. I have 2.25 in piping (dont go any bigger than that) with a magnaflow straight through muffler.
Search tool is your friend. Not to sound like an ass, but you should learn a little about your car & cars in general since you seem to be asking very basic questions. There are hundreds of threads like this on here.
it should bolt right up if you buy a complete system.
OR you can go to an exhaust shop and get them to make you one and just add whatever muffler you want. Thats what I did. I have 2.25 in piping (dont go any bigger than that) with a magnaflow straight through muffler.
OR you can go to an exhaust shop and get them to make you one and just add whatever muffler you want. Thats what I did. I have 2.25 in piping (dont go any bigger than that) with a magnaflow straight through muffler.
and the performance boosts are the same?
even with the custom exhaust?
and i need to know more by asking...
i want to hear it right from you guys from people that have done it before.
Last edited by GiantsFootball6; May 7, 2009 at 05:12 AM. Reason: Automerged Doublepost
Yea the only difference would be that the piping wont be mandrel bent unless if you find a shop that has a bender that will do that. BUT no the performance gains wont be enough of a difference to notice.
Whole exhaust setup cost me 200 dollars.
Header was 200 also I believe and 150 to install
Whole exhaust setup cost me 200 dollars.
Header was 200 also I believe and 150 to install
Thread
Thread Starter
Forum
Replies
Last Post



