For Sale LSJ parts clear-out

ItalianJoe1 · 07-19-2009, 02:42 PM

Cobalt's been gone, but the parts still remain. Pick what you want, better deals if you want more than one thing.

I have, off the top of my head...

Stock Stuff:
LSJ Alternator - $80 Have 2
LSJ Starter - $70
LSJ Engine wiring harness, complete, uncut - $110
LSJ Coil packs - $40 each, $150 for all 4 with harness. Have 11 total
LSJ fuel rail, stock - $40 one left, is painted with black wrinkle paint, but isn't perfect anymore.
LSJ Oil Cooler - $40 have 2
LSJ Thermostat housing - $20 have 2
LSJ Valve Cover, used - $80 Have 2
LSJ Cams, stock, used - $70
LSJ Valve springs + retainers, stock, used - $20
M90 stock pulley (3.8") - $5
LSJ stock upper motor mount, used - $25
LSJ Cylinder head, complete w/cams and full valvetrain, used - $350
LSJ Oil pan with baffle, used - $75
Tons of assorted bolts/sensors
LSJ Axle, drivers side, used - $60
LSJ balance shafts, used - $20
LSJ transmission spacer/shim - $25
LSJ lower control arms, used - $150 for the pair. (these have poly bushings installed, but they are worn out. I can remove prior to shipping if you would like, or possibly install solid CAB's if wanted)

Performace parts:
Generic E-bay blow-off valve, brand new - $10
GMPP gas pedal assembly, the one with the aluminum pedal - $50
9007 HID kit, has 4300K bulbs with it now, used - $80
Dual-pass endplate - $100 with exchange, PM for details
*Diamond 10:1 comp LSJ pistons, used. - $300 (will need new rings, come already installed on LSJ rods)

http://img144.imageshack.us/img144/8879/p1010090yv8.jpg

Updated 10/19/09

I'll add more to this later if I think of more, and i'll update regularly with whatever I come up with. I know there is more.

Ask away if you have questions, or there is something else you are looking for. I have a full engine with all sensors still on it, so if you need a sensor, clip, bracket, whatever, let me know. Can provide pics of whatever I have listed and more if you need them. Thanks for looking.

Shipping may or may not be included, depending on the item. Big/heavy stuff, I don't want to lose money on the shipping. If you buy a sensor or some other small part, i'll take care of it. PM or post up if there is a particular item in question for you.

Joe

damien · 07-19-2009, 02:46 PM

Joe you have any studs for the exhaust header to head with nut

AnthonyCM · 07-19-2009, 02:47 PM

IC Pump?

ItalianJoe1 · 07-19-2009, 04:19 PM

Quote:

Originally Posted by damien

Joe you have any studs for the exhaust header to head with nut

Yeah I should. How many do you need?

You can also use any nice socket cap screw, I did when I installed my header.

Quote:

Originally Posted by AnthonyCM

IC Pump?

No. Cheaper to buy a new one for $80 than screw around with used ones. I have 6 bad ones in the garage from mine and other cars.

MSHETZ · 07-19-2009, 04:29 PM

interested in trans pm me

damien · 07-19-2009, 05:27 PM

Quote:

Originally Posted by ItalianJoe1

Yeah I should. How many do you need?

You can also use any nice socket cap screw, I did when I installed my header.

No. Cheaper to buy a new one for $80 than screw around with used ones. I have 6 bad ones in the garage from mine and other cars.

I only need 1 stud if you have it. lemme know what you want PM me your paypal and ill take it

Sizzle06 · 07-20-2009, 12:11 AM

You have a pm Joe

zrated89 · 07-20-2009, 12:13 AM

M62 by chance and how many miles on the head?

ItalianJoe1 · 07-20-2009, 04:20 AM

Quote:

Originally Posted by zrated89

M62 by chance and how many miles on the head?

No more blowers, sold them all about 2 months ago.

Head has appx 40k miles on it, maybe high 30's, will ask the owner of the car it came from when I see him tomorrow, I don't remember.

Gene Culley · 07-20-2009, 08:36 PM

I am going to ask a stupid question. I haven't seen this written anywhere, so be easy on me, lol. Can you put LSJ oil cooler on 2.2?

zrated89 · 07-20-2009, 08:55 PM

Quote:

Originally Posted by ItalianJoe1

No more blowers, sold them all about 2 months ago.

Head has appx 40k miles on it, maybe high 30's, will ask the owner of the car it came from when I see him tomorrow, I don't remember.

does the lsj have baffles in the oil pan stock? just curious got any pics of the one you have?

ItalianJoe1 · 07-21-2009, 12:29 AM

Quote:

Originally Posted by Gene Culley

I am going to ask a stupid question. I haven't seen this written anywhere, so be easy on me, lol. Can you put LSJ oil cooler on 2.2?

I doubt the block has a provision for it. It normally bolts up right next to the oil filter, if there is a spot for it on the 2.2 I don't see why not, but I wouldn't bet on it.

Quote:

Originally Posted by zrated89

does the lsj have baffles in the oil pan stock? just curious got any pics of the one you have?

It has a factory baffle that bolts into the pan, yes. I don't have any pics now, need to get some more batteries for the camera. When I do I'll post up some pics of it and the other stuff.

last bump for the night.