Cobalt's been gone, but the parts still remain. Pick what you want, better deals if you want more than one thing.

I have, off the top of my head...

Stock Stuff:

LSJ Starter - $70
LSJ Engine wiring harness, complete, uncut - $110
LSJ Coil packs - $40 each, $150 for all 4 with harness. Have 11 total
LSJ fuel rail, stock
LSJ Oil Cooler - $40 have 2
LSJ Thermostat housing - $20 have 2
LSJ Valve Cover, used - $80
LSJ Cams, stock, used - $70
LSJ Valve springs + retainers, stock, used - $20
M90 stock pulley (3.8") - $5
LSJ stock ('06) upper motor mount, used - $25
LSJ Oil pan with baffle, used - $75
Tons of assorted bolts/sensors
LSJ balance shafts, used - $20
LSJ transmission spacer/shim - $25
LSJ STOCK injectors - $80


Performace parts:
Generic E-bay blow-off valve, brand new - $10
GMPP gas pedal assembly, the one with the aluminum pedal - $50
9007 HID kit, has 4300K bulbs with it now, used - $80
Dual-pass endplate - $100 with exchange, PM for details

http://img144.imageshack.us/img144/8879/p1010090yv8.jpg



Updated 2/16/10


I'll add more to this later if I think of more, and i'll update regularly with whatever I come up with. I know there is more.

Ask away if you have questions, or there is something else you are looking for. I have a full engine with all sensors still on it, so if you need a sensor, clip, bracket, whatever, let me know. Can provide pics of whatever I have listed and more if you need them. Thanks for looking.

Shipping may or may not be included, depending on the item. Big/heavy stuff, I don't want to lose money on the shipping. If you buy a sensor or some other small part, i'll take care of it. PM or post up if there is a particular item in question for you.

Joe

 

Joe you have any studs for the exhaust header to head with nut

 

IC Pump?

 

Yeah I should. How many do you need?

You can also use any nice socket cap screw, I did when I installed my header.

No. Cheaper to buy a new one for $80 than screw around with used ones. I have 6 bad ones in the garage from mine and other cars.

 

interested in trans pm me

 

I only need 1 stud if you have it. lemme know what you want PM me your paypal and ill take it

 

You have a pm Joe

 

M62 by chance and how many miles on the head?

 

No more blowers, sold them all about 2 months ago.

Head has appx 40k miles on it, maybe high 30's, will ask the owner of the car it came from when I see him tomorrow, I don't remember.

 

I am going to ask a stupid question. I haven't seen this written anywhere, so be easy on me, lol. Can you put LSJ oil cooler on 2.2?

 

does the lsj have baffles in the oil pan stock? just curious got any pics of the one you have?

 

I doubt the block has a provision for it. It normally bolts up right next to the oil filter, if there is a spot for it on the 2.2 I don't see why not, but I wouldn't bet on it.

It has a factory baffle that bolts into the pan, yes. I don't have any pics now, need to get some more batteries for the camera. When I do I'll post up some pics of it and the other stuff.

last bump for the night.

 

How about that header stud thing.

 

bump for new parts added. Lets get this stuff gone people.

 

what year car is the motor mount off of?

 

06 I belive, it's the one with the ridges on the top.

 

bump for it being late...

 

pm sent

 

pm sent

 

bump it up, pm's replied

 

Do you still have any fuel rails for 06 balt ss/sc? i need one asap!!!! PM'd

 

bumpo!

 

bump for a good seller... now only if he had rear seat belts...

 

Lol, what up John. There are quite a few locals here, should post up some of your parts you are trying to sell.

 

Bump

just wondered if we are still going ahead with the manifold and bracket?