Yes its true,

after more than 200 hours of labor I have successfully rebuilt the motor and got it working again W00t

just have to bleed clutch (dam linkage wont stay on tranny without leaking air)
torque crank pulley
tighten downpipe

replace wheels

drive till im arrested

 

congradulations!!!

 

Congrats man...nice to see that all your hard work paid off.

 

You mean, drive til you blow the motor again

 

now its time do to a writeup on howto time the lsj before i forget its a dam pill to do

 

na i wont blow it again im going to be able to monitor it alot better this time and have plenty of mods to keep heat down if i ever feel like installing my cobra HE thats next to my car, or taking off my ic plate to get the fitting welded into it.

Honestly i just want to drive the car for a few days then ill fiddle with it

I havent even put in any of my torque braces or poly mounts

 

Congrats man, glad to see you accomplish your task. .

 

You are a hero.

 

Dude, your gonna regret not doing the IC mod while the motor was out. Its is such a BITCH to remove the intake manifold while its still in the car!

 

I am very happy to hear that your car breathes, once again. Good work.

 

Good shiznit

 

congrats bro and good luck

 

Congrats. You deserve every pound of torq and hp you get out of it. Nice hard work, and now you can give tons of info about what not, and what to do.

 

YESSS!!! Congrats man. I just pulled my motor an hour ago. Saturday i will seperate the head and install new sleves and pistons. Glad to hear it works man. I will definately keep in touch for any new questions I may have.

 

bitchin!!!!!!1

 

Ok seriously you should get sound clips or Video up now....

 

Ya! I want to see and hear this beast.

Good work and
You're a pioneer to use all

 

I've been watching this thread since day one. Way to go dude.

 

******* Awesome Man! Glad to hear she finally breaths octane and air again! Now, the real tinkering begins. Have fun driving it, as you it's great to finally reap the results of all your hardwork and effort!

 

congrats on your hard work now get to the dyno

 

Congrats BD, yeah now you have to get to the dyno and see towhom you owe the 5 dollars to, haha. And deff get some sound clips up

 

CONGRATS!!!! Nice work!

 

I'm happy that you figured it out but I fear that the lack of one oil sprayer on the piston will cause you MAJOR problems.

 

Time will tell, I will ask my friend at GM what he thinks about the loss of an oil squirter and see what he says...

Its running and that's where it's at! Too bad you couldnt have the hole drilled/tapped out more and use a bigger banjo bolt to hold the squirter!

 

Its been about 9 hours now. Anyone want to go bail him out of jail so he can do the write up?


Congrats.