1/4 times and hp estimate
1/4 times and hp estimate
mods: gms1 stacked with HPT (22psi), k&n typhoon intake, injen UIC, ZZP 3" downpipe and exaust, water methanol injectection
so what could i expect for horse power, and a quarter mile time? i want 350 ponies, but dont know how much of it would get to the wheels, and i want to be under 12 secs in a quarter mile, what yall think?
so what could i expect for horse power, and a quarter mile time? i want 350 ponies, but dont know how much of it would get to the wheels, and i want to be under 12 secs in a quarter mile, what yall think?
you need some slicks or drag radials along with an hp tune so you can at least be on the 330whp range counting that your using meth+a custom tune you can probably bump up your timing so your car would be running alot harder and maybe then 12s are achievable
yeah i didnt think i would get below 12's only a hope. but if i could crank out 350 ponies, and get alot of that to the wheels ill be happy. any other ideas on what i can do to get more ponies?
On DR's with 350 to the ground, a good launch should deff get you into the 12's
Edit: **** im on bsr ppc canned tuned ( maybe at 300whp) and I ran 13.2. Ill be seeing 12's with a custom tune soon. You should too ( if you can drive that is)
Edit: **** im on bsr ppc canned tuned ( maybe at 300whp) and I ran 13.2. Ill be seeing 12's with a custom tune soon. You should too ( if you can drive that is)
Last edited by adamo41188; Dec 21, 2011 at 08:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post



