Ive searched and cannot find what I am looking for. Can you purchase the connectors for the factory harness so I can make my own "plug and play" connector?

 

These are your best bet and easiest to do man:

Cobalt, Solstice, HHR Stage Kit Harness Adapter 19212670H

 

I think Crate Engine Depot has something like that.

 

Bah I'm not after those I want to make my own of those, I am just looking for the female connectors to the factory map sensor harness, I'll rummage through the books and see

 

Yeah, you will have to find out wat the P/N of the stock connectors is and then try to buy them from GMPD. From what i recall, your going to spend the CED price or more to get the connectors from GM. Unless you find a totaled LNF that you can muder the wiring harness on LOL

Good luck!

 

Not only that you have to buy the $100+ set of wire crimpers.

You MAY find what you're looking for here.

http://www.theelectricaldepot.com/delphi-connectors-7/

 

Holy crap that site is awesome LOL

 

I have everything I need to crimp the wires I am a tech at Toyota I'll let you know what I find I'm going to stop at our gm store and check the books tomorrow

 

$100 for some wiring. lame. i get that it makes life easier but thats not $100 worth of work right there. all you need is the male/female connectors and some wires. lol

 

^^^^ this, which is why I refuse sense I have the tools to make it mysekf

 

Dude, GM charges and arm and a leg for connectors like that LOL
The price for the RPD connector is still between $95-$130. The prices they charge are rediculous if your not a wholeseller or can get a nice hookup on that kind of stuff.

I honestly have no idea what the MAP connectors cost though so maybe youll find them for a decent price. Mine's are cut and soldered into place so i never looked into it

 

well i looked for the connector for a little no luck. so i just made my own with the correct terminals some heat shrink and eletrical tape along with some dielectric grease to keep from corrosion. I was completely against cutting my harness....