Sema 2008
Sema 2008
i see one in their new setup
Senior Member
Joined: 12-17-06
Posts: 1,164
Likes: 0
From: Michigan
New Member
Joined: 11-25-05
Posts: 95
Likes: 0
From: Jersey
There is NO reason you should be worried about the clutch in the SS/TC's.. I had an 07 SS/SC that I bought with GM Stg2 then further modded her with a 2.79 pulley, Vibrant 3" Cat-back, Injen CAI, NGK's, Eibach Springs, Dyno Tune, and a couple other things, and I put OVER 30K miles in right about a years time with the factory clutch...AND, the SS/TC's clutches are a MUCH better design.
Senior Member
Joined: 12-17-06
Posts: 1,164
Likes: 0
From: Michigan
a few people that have tuned the SS/TC have noticed clutch slip, including myself
duke3323 - pay attention to the K04 thread, by the end of this week BTF should have some numbers with this upgraded wheel on my car
duke3323 - pay attention to the K04 thread, by the end of this week BTF should have some numbers with this upgraded wheel on my car
Senior Member
Joined: 12-17-06
Posts: 1,164
Likes: 0
From: Michigan
Member
Joined: 03-28-08
Posts: 201
Likes: 1
From: PA
I talked to a GM rep at SEMA.
Release date 1st quarter of 2009.
Reason is that they want to release 07,08, & 09 all at one time.
All that they're waiting for is the CARB paperwork for the 2009.
Everything is done, & ready to go.
Only a Stage 1 kit for the TC cars. No Stage 2 or 3 ,will ever happen.
They will 'lock' the program the best that they can do, as they don't want
anyone changing anything in the program.
The rep that I talked to didn't know if the 'program' raises the 255kpa limit.
Release date 1st quarter of 2009.
Reason is that they want to release 07,08, & 09 all at one time.
All that they're waiting for is the CARB paperwork for the 2009.
Everything is done, & ready to go.
Only a Stage 1 kit for the TC cars. No Stage 2 or 3 ,will ever happen.
They will 'lock' the program the best that they can do, as they don't want
anyone changing anything in the program.
The rep that I talked to didn't know if the 'program' raises the 255kpa limit.
Senior Member
Joined: 06-23-08
Posts: 4,709
Likes: 0
From: Alberta
Major disappointments from SEMA..........
GM not only does not have ANYTHING for their supposed stage kits here at SEMA, but none of their representatives know ANYTHING about it, and I don't get the impression that they are playing dumb, they either are dumb or there is a longer wait ahead of those who want the OS and sensors.
I see NO cobalts whatsoever here at SEMA, Only ECOTEC support I see is a Malibu...whoopity doo!
GM not only does not have ANYTHING for their supposed stage kits here at SEMA, but none of their representatives know ANYTHING about it, and I don't get the impression that they are playing dumb, they either are dumb or there is a longer wait ahead of those who want the OS and sensors.
I see NO cobalts whatsoever here at SEMA, Only ECOTEC support I see is a Malibu...whoopity doo!
GM Performance part rep told me this morning that you can't increase the power on the LNF above stock even if you tune it......LOL, I literally walked away from him at that point didn't even end the conversation. I may as well ask the slutty models walking around what's coming out from GM if that's how helpful the reps are.
I talked to a GM rep at SEMA.
Release date 1st quarter of 2009.
Reason is that they want to release 07,08, & 09 all at one time.
All that they're waiting for is the CARB paperwork for the 2009.
Everything is done, & ready to go.
Only a Stage 1 kit for the TC cars. No Stage 2 or 3 ,will ever happen.
They will 'lock' the program the best that they can do, as they don't want
anyone changing anything in the program.
The rep that I talked to didn't know if the 'program' raises the 255kpa limit.
Release date 1st quarter of 2009.
Reason is that they want to release 07,08, & 09 all at one time.
All that they're waiting for is the CARB paperwork for the 2009.
Everything is done, & ready to go.
Only a Stage 1 kit for the TC cars. No Stage 2 or 3 ,will ever happen.
They will 'lock' the program the best that they can do, as they don't want
anyone changing anything in the program.
The rep that I talked to didn't know if the 'program' raises the 255kpa limit.
Last edited by 1WhiteSSTC; Nov 5, 2008 at 07:00 PM. Reason: Automerged Doublepost