Like the topic states im almost done with gathering parts for my build, just need rods and my gridled block which i will purchase in another month. what is brought so far is as follows plus minus some things think i got everything covered besides brakes suspension:


- PWerks Custom Painted Valve Cover: $300.00
- Treadstone Silicone Radiator Hoses (Black): $60.00
- Treadstone Bypass Block Off Plate: $34.95 / BROUGHT THIS B4 DEPLOYED WHEN INSTALLED BOV
- ZZPerformance Gauge Pillar: $75.00
- ZZPerformance Adjustable Clutch Rod: $100.00

MOTOR:
- Amsoil Break In Oil: 5qts.: $46.98
- Amsoil 5w20 Motor Oil 5qts. : $43.95
- ARP Headstuds: $110.00
- ATI Turbo Damper: $390 / ZZPerformance
- Clevite Rods Bearings: 109 / PWerks
- Hahn RaceCraft Intake: $249.00
- LNF Stage 1 Cam w/ bigger fuel lobe: $180.00
- Neutral Balance Shafts: $269.00 / ZZPeformance
- Wiseco Pistons: $490 (BROUGHT / Monograt css.net)
- ZZPerformance Lower Engine Mount: $89.00

TURBO:
- Hahn RaceCraft Intercooler: $800.00 / ON THE CAR WHEN I BROUGHT IT
- Hahn RaceCraft Charge Piping: $319.00
- PTE5857 Dual Ball Bearing .63ar w/ Surge Protection (4in inlet, 2.5in outlet): $1,000
- Tial Type "Q" Blow Off Valve: $249.00
- Turbine Screen for Turbo:
- Treadstone Titanium Turbo Heat Shied: $202.97
- TurboSmart 38mm Ultralight Wastegate: $230.00
- ZZP Oil Feed & Return Lines: $89.00
- ZZP Lower Charge Pipe w/ MAF Relocate: $175.00

TRANS:
- ClutchMasters LightWeight Flywheel: $279.00 / ON THE CAR WHEN I BROUGHT IT
- Spec Stage 3+ Clutch w/ TOB: $750.00
- Spec Lightweight Flywheel: $400.00 / Defined Performance
- TH Motorsports Stainless Steel Clutch Cable (yellow): $69.50
- ZZPerformance Trans Mount: $129.00

Exhaust:
-Hahn RaceCraft Cat-Back Exhaust: $549.00
- Modern Performance Downpipe: $150.00 / BROUGHT THIS B4 I DEPLOYED
- ZZP Exhaust Manifold w/ wastegate dump tube: $250.00
- ZZP Downpipe: $200.00: $200.00

Electronics:
- AEM Boost Gauge: $139.00
- AEM Wideband Gauge: $190.00
- Aeroforce Interceptor: $219.00
- GM Factory Coils x4: $80
- GM Performance Map Sensor Harness: $102.98
- GM Performance 3 Bar Map Sensors x2: $36.78
- GM Performance Map Sensor Orings x2: $5.16
- HP Tuner: $400.00
- MAF Extension Harness: $29.00

 

Nice build man.

 

Um, you don't need a bypass block off for the pte5857

 

this

 

subd

 

and you have 2 flywheels......and an $800 intercooler

 

had the block off before i got the turbo, got the block off when i installed my bov.

 

Yeah, I would get a performance autowerks race intercooler before I'd spend 800 on a hahn.

 

u can get the hahn intercooler for 500 now

 

clutchmasters flywheel was on the car when i brought it, and i got the spec flywheel to better match with the spec clutch i brought, I can sell it to u if u want , and the hahn intercooler been on my car since purchase, my very first thread on here showed my car was complete hahn bolt on's posted the prices as stated on the website vast majority of the stuff has come from other forum members and what i brought online.

 

Damn man. This thing is gonna be a monster when it's done. Sub'd for progress and to see the turn out.

 

man im dying to hurry up and end this deployment. its killing me.

 

gotta love deployment pay though :P I have only heard that it is pretty damn nice! Good luck man and stay safe! if ya need anything let me know! shipping stuff to you is FREE for me! APO-to-APO!

 

I hear the highest total payout was $266k, not including Haz pay and the other "bonuses".. but I hear this guy was in Iraq for 9 years for both Gulf wars I & II and in Afghanistan for 10 years and he never left the theater in 19 years.. damm!!

 

correction: it was 23 years in the theater..

 

That's only 10K per year.

 

Bought not brought.

Looking good man! Post pictures when you get them.

 

Too much time in war........

 

love APO to APO....im gud though loveing the incentive pays thats wuts really pushing my build, after my blocc im looking at maybe 2k install an tune, and still leaving afghan with bout 7k. gonna love my month off lol tons of vids, honestly only pix i have is of the parts i brought.

 

no way you can stay in theater that long unless you a contractor which their leave is based upon them and nowadays its 6 months on and off sum decided just not to take leave but uniform enlisted or officer have to leave with their unit or partnered unit. **** i would have stayed in iraq if that was possible.

 

We were talking last night at our car meet and everyone wants to get deployed so they can buy parts. Lol

 

lmao its cool i mean i have no problem with my cob, we get it crunk when we have to but mow that i have achieved so much man its killing me for install. bumping from 326whp to pver 500whp **** im gonna love it cant wait to get my leave when i get bac.

 

yeah man bet its gonna feel amazing to finally come home!

 

like a bday that never ends, thats going to be my lottery prize landing in texas...6 more months of savings and researching parts.

 

Sounds like a sick build man, I'll keep an eye on this for build pics. What unit are you with?

I frickin' graduate AIT here at Ft. Sam Houston November 30th, and my ERB is projecting me Ft. Hood, 3rd ACR...FML. I was hoping I'd get Ft. Bragg since I'm from Fayetteville, guess I'm not that lucky. My older brother is stationed at Ft. Hood though so we should have a good time together haha. Maybe we can meet up when you get back?