Nice! Ordering one now then lol
How's the sound btw? Anybody got a sound clip |
Nice! Well ordering one now! How's the sound btw? Anybody got a video clip?
|
Just saw t2's post about getting water into the maf with the Hahn, really worried me, especially being my dd, so after doing a shit load more research and looking for a week now, im ordering the k&n SRI :) found a very good deal as well.
|
very good choice
|
I thought so too man, like the sound of it as well. A got it brand new for $216 shipped :)
|
Originally Posted by turbaltss08
(Post 6975478)
I thought so too man, like the sound of it as well. A got it brand new for $216 shipped :)
|
Originally Posted by turbaltss08
(Post 6974866)
Just saw t2's post about getting water into the maf with the Hahn, really worried me, especially being my dd, so after doing a shit load more research and looking for a week now, im ordering the k&n SRI :) found a very good deal as well.
|
bwahaha..now thats custom..lol
|
Lol nice! Just installed the k&n, sound AMAZING. And definitely a little quicker, just need to get tuned. Anybody have preferences on tunes?
|
was wondering if any of these increase mpg's as well really interested in the aem or hahn
|
Originally Posted by skateerkid99
(Post 7073104)
was wondering if any of these increase mpg's as well really interested in the aem or hahn
|
[QUOTE=turbaltss08;6980236]Lol nice! Just installed the k&n, sound AMAZING. And definitely a little quicker, just need to get tuned. Anybody have preferences on tunes?[/QUOTE
Just got mine installed. Anyone else have problems when letting of the throttle hearing like a whipple noise? Figured loose fitting somewhere, checked EVERY gasket, screw on the k&n and still hearing. Holds boost when on throttle but when I let off its making this noise. Any ideas? |
It's bpv flutter. I'm almost willing to bet you did a vacuum tank bypass?
|
Originally Posted by 09CobaltSS1
(Post 7074715)
It's bpv flutter. I'm almost willing to bet you did a vacuum tank bypass?
|
Originally Posted by QCbalt09
(Post 7074919)
Ya when I was running a bov. But since I put stock charge pipes back on its hooked up just like when stock.
|
Are you running a Forge BPV? When it needs servicing it'll do that.
|
Originally Posted by Sox-Fan
(Post 7074955)
Are you running a Forge BPV? When it needs servicing it'll do that.
|
Originally Posted by turbaltss08
(Post 6980236)
Lol nice! Just installed the k&n, sound AMAZING. And definitely a little quicker, just need to get tuned. Anybody have preferences on tunes?
|
Originally Posted by QCbalt09
(Post 7074984)
No I just put the stock bpv back in when removing the bov. And servicing? Something I can do? The dealers in my area don't know anything about these cars. When I first took my car in after I bought it, they were accusing me of putting aftermarket brakes (brembos) on which voided my warranty. Lol.
|
Originally Posted by Terminator2
(Post 7074992)
Check vac lines for leaks then if none found try bypassing the vac tank. If it gets better it means the check valve is going bad in the vac tank.
|
Well checked all fittings, hoses, and cover on bpv. No luck so tomarrow ill bypass the vac tank. Write up for this?
|
Originally Posted by QCbalt09
(Post 7076642)
Well checked all fittings, hoses, and cover on bpv. No luck so tomarrow ill bypass the vac tank. Write up for this?
https://www.cobaltss.net/forums/7058588-post31.html |
I know I am probably beating a dead horse, but why not lol?
Right now I have the Hahn CAI. It works great, but after reading this thread it has me thinking. I am torn between Keeping my Hahn or going with the treadstone CAI. I am fully bolted and have the GMS1 ( I am waiting till my warranty runs out to get a tune and a ZFR ) Basically will the Treadstone Honeycomb CAI give me more accurate / consistent MAF readings and therefor make drivability better? Or, am I just over thinking this and stick with my Hahn CAI? Does anyone actually have experience with the two? I am looking for improved MAF readings ( drivability ) over my Hahn. |
Awesome thread! Thanks for the info
|
I didn't really all 16 pages I'm sorry, but does any one have number on the K&N SRI typhoon intake?
|
Originally Posted by NY Cobalt/tc
(Post 7303183)
I didn't really all 16 pages I'm sorry, but does any one have number on the K&N SRI typhoon intake?
|
I'm very indecisive. But I'm just looking for thoughts, issues, and power gains(tuned and untuned)
|
K&N SRI is the way to go. I don't think ZZP sells it though. Go to Modern Performance or eBay for it.
|
Did powell ever get his intake going?
|
Originally Posted by bmartz1991
(Post 7303366)
K&N SRI is the way to go. I don't think ZZP sells it though. Go to Modern Performance or eBay for it.
|
I have GMS1 installed and installed the Hahn CAI and I had issues with going into limp mode. I also got the code P0101 MAF sensor. How long have you been running with the Hahn CAI and GMS1 tune? Do you have any suggestions. I'm not sure why I was having these problems. I looked over the install 100 times before I just decided to put the stock intake back on and after that no problems.
I want to have the intake installed and get the selectable Trifecta tune, but I have to get this figured out before I get Trifecta tuned. |
Originally Posted by Bourgeois
(Post 7304622)
I have GMS1 installed and installed the Hahn CAI and I had issues with going into limp mode. I also got the code P0101 MAF sensor. How long have you been running with the Hahn CAI and GMS1 tune? Do you have any suggestions. I'm not sure why I was having these problems. I looked over the install 100 times before I just decided to put the stock intake back on and after that no problems.
I want to have the intake installed and get the selectable Trifecta tune, but I have to get this figured out before I get Trifecta tuned. |
Originally Posted by umrdyldo
(Post 7303737)
Amazon
|
Ebay is cheaper. Make sure you go with reputable seller (like Jeggs official in the link below) and pay with paypal (for refund purposes) and you'll be fine.
Amazon: eBay: http://www.ebay.com/itm/K-N-69-4518TTK-Typhoon-Air-Intake-System-/111037778913?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item19da5e0be1 |
My Hahn CAI went to shit so I ordered the K&N. Got it installed earlier today but now the car is running very rough and actually died twice. My MAF is dirty due to it falling into some mud but I cleaned it up best I could. Might just go buy a new MAF and see how that works.
|
Originally Posted by FutureEcotecOwner
(Post 7308801)
My Hahn CAI went to shit so I ordered the K&N. Got it installed earlier today but now the car is running very rough and actually died twice. My MAF is dirty due to it falling into some mud but I cleaned it up best I could. Might just go buy a new MAF and see how that works.
|
Originally Posted by bmartz1991
(Post 7309149)
What position do you have your filter at? That could be part of the reason too.
|
Moving the silver line in the filter to a position of a clock.
|
^ This, I have the metal pleat on mine positioned at around 11 / 12 o'clock.
|
I do believe mine is put at the one o clock place as well.
|
All times are GMT -4. The time now is 01:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands