50 lbs injectors
#1
Senior Member
Thread Starter
50 lbs injectors
Where can i get them, who has the best ones and how many people are running theses? p.s please dont say go with 60lbs because they are too big.
#4
Senior Member
Thread Starter
#9
Senior Member
Thread Starter
whats the point of coming in here saying get 60lbs i already said i dont want them gheez. can i get some knowledgable feedback please there a tun of sites that sell 50lbs i just figured people would be running them
#10
Senior Member
Join Date: 07-21-07
Location: Florida
Posts: 3,608
Likes: 0
Received 0 Likes
on
0 Posts
here you go dude
http://www.cobal tperformanceparts.com/Cobalt_Fuel_Delivery-Cobalt_50lb_Fuel_Injectors_Set_Of_4.html
fix the gap where it says cobalt
http://www.cobalt performanceparts.com/Cobalt_Fuel_Delivery-MSD_Competition_50lb_Fuel_Injectors_Set_Of_4.html
as for how good they are, i dont know. i have never talked to anyone who has used them
http://www.cobal tperformanceparts.com/Cobalt_Fuel_Delivery-Cobalt_50lb_Fuel_Injectors_Set_Of_4.html
fix the gap where it says cobalt
http://www.cobalt performanceparts.com/Cobalt_Fuel_Delivery-MSD_Competition_50lb_Fuel_Injectors_Set_Of_4.html
as for how good they are, i dont know. i have never talked to anyone who has used them
Last edited by anthonyS88; 01-08-2008 at 12:18 AM. Reason: Automerged Doublepost
#11
Senior Member
Thread Starter
^^^^^I already knew about those sites, i wanna know if anyone is running/tuning with these and how good are they i personally know someone thats using them in there car but the car isnt tuned either so......
#18
Senior Member
Join Date: 10-12-06
Location: Saskatchewan
Posts: 3,089
Likes: 0
Received 0 Likes
on
0 Posts
we aren't being paid here buddy, calm down and show some respect. i haven't come across anyone who is using the 50s, and they are quite rare in cars that are running on this site. so, if you do want to know about 50s, i'd suggest asking intense themselves, because they do a lot of their own tuning.
#21
Banned
Join Date: 03-14-06
Location: soon to banned as I am from MANITOBA?
Posts: 3,660
Likes: 0
Received 1 Like
on
1 Post
K I think you should PM this guy as others think he has them. if so then he can help you. So PM him and ask. if he doesnt have em then lay down another post here to tell us.
now besides this a couple of things.
GM 42's are 42's at said pressure of 45lbs I believe. but the system runs at 58psi. a 60's injector is like 70 lbs/hr at 58. I mention this so when your looking at 50 lbs/hr injector that you check into the PSI used to rate them. just to be sure your getting what you want.
now the other thing. without flaming you. why is 60lbs injectors too big? just curious as to the problem. I feel 60's are too small for a turbo setup and if I go turbo I will likely get 100 lbs/hr. that being said I dont think your turboing here. your obviously are planning on running a particular setup. so what might that be? just curious as to what setup you got going. thanks.
now besides this a couple of things.
GM 42's are 42's at said pressure of 45lbs I believe. but the system runs at 58psi. a 60's injector is like 70 lbs/hr at 58. I mention this so when your looking at 50 lbs/hr injector that you check into the PSI used to rate them. just to be sure your getting what you want.
now the other thing. without flaming you. why is 60lbs injectors too big? just curious as to the problem. I feel 60's are too small for a turbo setup and if I go turbo I will likely get 100 lbs/hr. that being said I dont think your turboing here. your obviously are planning on running a particular setup. so what might that be? just curious as to what setup you got going. thanks.
#22
Senior Member
Thread Starter
K I think you should PM this guy as others think he has them. if so then he can help you. So PM him and ask. if he doesnt have em then lay down another post here to tell us.
now besides this a couple of things.
GM 42's are 42's at said pressure of 45lbs I believe. but the system runs at 58psi. a 60's injector is like 70 lbs/hr at 58. I mention this so when your looking at 50 lbs/hr injector that you check into the PSI used to rate them. just to be sure your getting what you want.
now the other thing. without flaming you. why is 60lbs injectors too big? just curious as to the problem. I feel 60's are too small for a turbo setup and if I go turbo I will likely get 100 lbs/hr. that being said I dont think your turboing here. your obviously are planning on running a particular setup. so what might that be? just curious as to what setup you got going. thanks.
now besides this a couple of things.
GM 42's are 42's at said pressure of 45lbs I believe. but the system runs at 58psi. a 60's injector is like 70 lbs/hr at 58. I mention this so when your looking at 50 lbs/hr injector that you check into the PSI used to rate them. just to be sure your getting what you want.
now the other thing. without flaming you. why is 60lbs injectors too big? just curious as to the problem. I feel 60's are too small for a turbo setup and if I go turbo I will likely get 100 lbs/hr. that being said I dont think your turboing here. your obviously are planning on running a particular setup. so what might that be? just curious as to what setup you got going. thanks.
Whoever i said that to was not trying to help if you read a post saying dont tell me to do a particular thing why woould you read it and come in and say to do it, this is not a thread to get your post counts up or to play around in; i want some real insight from people / hp tuners that have experience with the injectors not 20 post saying just get 60lbs.
Last edited by Darkmanx; 01-08-2008 at 07:47 PM. Reason: Automerged Doublepost
#23
Senior Member
iTrader: (1)
Join Date: 04-30-06
Location: J-Town, Wisconsin
Posts: 14,901
Likes: 0
Received 0 Likes
on
0 Posts
60lbs are hard to tune and im not going turbo i want to keep my supercharger and i dont want crappy idle and hard to control pulse width . And my 42 lbs are reading above 100 idc so i want to find a balance get it?
Whoever i said that to was not trying to help if you read a post saying dont tell me to do a particular thing why woould you read it and come in and say to do it, this is not a thread to get your post counts up or to play around in; i want some real insight from people / hp tuners that have experience with the injectors not 20 post saying just get 60lbs.
Whoever i said that to was not trying to help if you read a post saying dont tell me to do a particular thing why woould you read it and come in and say to do it, this is not a thread to get your post counts up or to play around in; i want some real insight from people / hp tuners that have experience with the injectors not 20 post saying just get 60lbs.
#24
Senior Member
Thread Starter