AFE power is going to release a new intake for the lsj
09-02-2009, 09:05 PM
#1
Senior Member
Thread Starter
Join Date: 08-03-07
Location: SANDIEGO.........
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
AFE power is going to release a new intake for the lsj
hello every 1 just wanted to let all the lsj owners out there that there is going to be another intake comeing out for the lsj cobalts. i was the test dummy for this product and with this intake i made 18whp anf 18wtq on a mustang dyno . i feel quite a difference in the car with this intake over an airbox mod which was what i had but before the airbox mod i had a fujita. and compairing the fujita to the afe i feel a big difference between the two. i was extremely impressed in the quality and design of the intake.i will up load some photos of the intake asap. its uses a large 4in filter and is 4in pipeing that has a transision to 3in pipeing. its a 2 piece and there is no rubbing issues cause i let them know about the other issues with the other intakes and i feel they did an amazing job with this 1. so you guys should check it out soon. they said they are going to release is tomorrow so check it out at
www.afepower.com
if its not up yet u shoud give afe power a call at 951-493-7100
and talk to them about the intake
www.afepower.com
if its not up yet u shoud give afe power a call at 951-493-7100
and talk to them about the intake
09-02-2009, 09:16 PM
#4
Senior Member
iTrader: (1)
Join Date: 07-02-05
Location: West Carrollton (Dayton), OH
Posts: 8,725
Likes: 0
Received 2 Likes
on
2 Posts
Where is the maf housed? In the 4" or 3" section? Is your car an '07? The '07 ss/sc has the brake lines ran a little differently (in front of the PCM, not the brake lines by the caliper)
09-02-2009, 09:24 PM
#5
Senior Member
Thread Starter
Join Date: 08-03-07
Location: SANDIEGO.........
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
i know the intake clears the lines fine.yes i have an 07.and ill up load a pic with my cameria phone.. the MAF sensor is at the end of the transision from where the 4in goes to 3in
09-04-2009, 05:09 PM
#12
09-04-2009, 05:15 PM
#13
Banned
Join Date: 03-09-08
Location: Illinois
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
I don't think the gains are gonna be that high, but it's still cool to see more and more companies making parts for the lsj's / cobalts. I looked through the site quickly and didn't even see our car listed on it anywhere. If someone finds the link post it up. I wanna see what it looks like and the pricing on it. I am in no way interested in it, just a bit curious.
09-05-2009, 07:14 PM
#14
Senior Member
Thread Starter
Join Date: 08-03-07
Location: SANDIEGO.........
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
hey its cool if u call b/s i dont really care . i was there i saw my car on the dyno and i saw the numbers man. dont worry u will see the dyno numbers soon bro. its cool man i understand there are some noobs here and some people under estimate there vehicle and the after market support of all these companys .hahahahahaha.
if u want call afe power .951-493-7100
ask to talk to adrian ornales ryan takashima
these are the guys that worked with me on the intake , they are resourses and development. call them and ask them if i really made 18wtq and 18whp. if u eally call b/s. and go ahead man.
if u want call afe power .951-493-7100
ask to talk to adrian ornales ryan takashima
these are the guys that worked with me on the intake , they are resourses and development. call them and ask them if i really made 18wtq and 18whp. if u eally call b/s. and go ahead man.
09-05-2009, 07:18 PM
#15
Senior Member
Join Date: 07-14-08
Location: Saskatoon, Saskatchewan
Posts: 3,279
Likes: 0
Received 0 Likes
on
0 Posts
hey its cool if u call b/s i dont really care . i was there i saw my car on the dyno and i saw the numbers man. dont worry u will see the dyno numbers soon bro. its cool man i understand there are some noobs here and some people under estimate there vehicle and the after market support of all these companys .hahahahahaha.
if u want call afe power .951-493-7100
ask to talk to adrian ornales ryan takashima
these are the guys that worked with me on the intake , they are resourses and development. call them and ask them if i really made 18wtq and 18whp. if u eally call b/s. and go ahead man.
if u want call afe power .951-493-7100
ask to talk to adrian ornales ryan takashima
these are the guys that worked with me on the intake , they are resourses and development. call them and ask them if i really made 18wtq and 18whp. if u eally call b/s. and go ahead man.
09-05-2009, 07:23 PM
#16
Senior Member
Thread Starter
Join Date: 08-03-07
Location: SANDIEGO.........
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
here is some pics
not that great of pics... it was my call phone
all i hear is hateing.........more hateing .........and more hateing................hahahahaha..... dont hate me cause ur car made 3whp with an injen intake hahahahaahahahaahha jk jk
not that great of pics... it was my call phone
all i hear is hateing.........more hateing .........and more hateing................hahahahaha..... dont hate me cause ur car made 3whp with an injen intake hahahahaahahahaahha jk jk
Last edited by racehtecobalt; 09-05-2009 at 07:23 PM. Reason: Automerged Doublepost
09-05-2009, 07:34 PM
#17
im also gonna call bs on this. there is no way your going to gain 18tq/hp by changing a peice of plastic pipe to aluminum and changing the air filter (thats all a CAI is). looking at the pics, it doesnt even look that good. it appears it hits the pcm, and id be very concerned about it setting lean codes due to the increased diameter of the pipe and location of the maf. id bet the maf will require re-scaling to compensate for the large pipe.
09-05-2009, 07:39 PM
#18
Senior Member
Thread Starter
Join Date: 08-03-07
Location: SANDIEGO.........
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
it sits good. no rubbing on anything and its about 1.5in away from the pcm also it doesnt throw lean codes and the car runs really well...its ok juat wait till people start buying the intake.
lots of people were talking **** about the jbp head and look what happend .every1 and there mom has it...... its only a matter of time.
im guessing ur a noob aswell... hahahaha jk.lol
lots of people were talking **** about the jbp head and look what happend .every1 and there mom has it...... its only a matter of time.
im guessing ur a noob aswell... hahahaha jk.lol
Last edited by racehtecobalt; 09-05-2009 at 07:39 PM. Reason: Automerged Doublepost
09-05-2009, 08:04 PM
#22
Senior Member
Thread Starter
Join Date: 08-03-07
Location: SANDIEGO.........
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
hahahaha i try and make a post just to keep people informed about this intake and all i get is a bunch r haters.what do u exspect. people who dont know ****....
hahahahahahahaha.
hahahahahahahaha.
Last edited by racehtecobalt; 09-05-2009 at 08:04 PM. Reason: Automerged Doublepost
09-05-2009, 08:05 PM
#23
Senior Member
Until Dyno #'s are posted, anyone with a shred of common sense is going to call BS on 18hp/18tq gain with an intake on a 4 banger. 300+HP v8's don't even see those kind of gains from a 4" intake.
