just got back from stage 6 who did my tune. i endedd up with 272.4hp and 254tq. there is still a little more we can get out of it but it was pretty late. i will scan and post dyno sheet soon.

 

272 With A 2.85" Pulley!?!? **** Thats Nuts!!!

 

With Only The Mods In Your Sig Thats Awesome!!

 

Damn nukka, and you say there's more you can get?

 

awsome numbers,do you think being sea level helps a bit?

 

its 48 degrees right now its so nice! and this car feels a hella lot faster!

 

**** man. Is you sig the only modds you have?? If so those are awesome #'s man!! hahaha and there is more left in that :-p

 

yeah thats the only mods done.. also installed colder plus (1) i will be getting a custom downpipe done sone and get rid of the cat. and the guy said i should see and 10 to 15 more hp but i dont know.

 

dyno is high most likely a dyno jet.

 

Good numbers man, I wanna do a 2.8" with Hptuners. How hard is it to use Hptuners?

 

If those numbers are legit, I'm going there to get my car tuned! Holy **** bro, those are some nice numbers for the mods you have. Are those numbes corrected or uncorrected, and what type of dyno was it?

 

Awesome numbers for the mods listed in your sig.

 

those numbers are close to mine with my custom tune and a 2.85 you got a bit more torque on me though, good numbers

 

they sad the dyno was on the low end. it was a Dyno Dynamics Dynamometer. b\c i asked and everyone said it reads on the low end. i am pretty happy with it. also i didnt mess with the software they did it. but it was pretty detailed you could go in and change everything

 

Nice numbers. That sounds about right.

 

Nice numbers once again bro. Can you post the dyno sheet on the ss.net gallery when you do it, so I can see it as well? Thanks.

 

I dont know...thats pretty high #'s, I dont even think I am pulling that, if i am, im right in that ball park...

 

drailSS, clean out your PM box please! I have some questions for you. Thanks.

 

ok sorry about that go ahead

 

i will post the dyno sheet when i get home tonight. if i can get the scanner to work

 

i dynoed at 240hp 203tq with just intake and exhaust. then 272hp 254tq. so i picked up 32hp and 51tq with the tune and 2.85 stg 2

 

Did you ever do a stock dyno run at all??

 

It would be interesting to know what dynometer was used and the load/interia calibration settings were. Those are some awesome numbers! Congrats.

 

no stock run and no it dont know what the load\interia calibrations where. but thanks

 

scanner wouldnt work so i took a picture of it. not the best but you can still see the hp and tq curves.