ya what would you do without me haha plus obviously it was a fun night met up with some people form meetblackpeople.com it was nice

 

Wait what? Lol I had a ssg that shared lots of blackplanet.com stories in Iraq

 

Its a joke our waiter asked if we were meeting up with girls and got stood up since it was all dudes eating and we said no we met eachother on meetblackpeople.com and christianmingle and singlefarmers it was a pretty interesting dinner

 

That's awesome hahaha

 

Man I met some gems on blackplanet back in the day

 

I think at the end of it he was still trying to figure out what was true and what we were trolling him on

Anyways, got Cody's turbo on and got it on 17lbs. Yesterday was my day off and it was 63* so I got to have some fun and put some miles on it. Got just over 200 miles now. On 17lbs it should be right at or just above 400whp (this is a guesstimate). Also got my first "race" in. Nothing exciting, just an overly confident RX8 owner that had just bought it and wanted to test it out. You can about imagine how that went. He actually raced one of my friend's first, but then made his way up to me since I was out ahead making sure we were clear, and he insisted, so I gave him what he wanted

 

Lol..... Give the people what they want

 

If I have a passneger tonight maybe I'll take a video haha

 

You still running those 80s?

 

Yeah his new goodies are on their way today. I've been busy

 

I thought he had 1000 idcs and is going up to 1200

 

rape train!!! nice man i'm really glad to know your ****'s running good!

(thought it would run better with a pan-vac setup... )

 

Yep haha but not for long!

Damn straight!

I sold the 1000's to Trevor, he was the one that called dibs before you lol. So I have his old 80's in there for now.

Its running so well! Makes me happy.

I've been down the road of improperly functioning PCV setups and I'm done with that lol. It's not all about evacuation, even with a big turbo setup. Allowing fresh air to ciurculate through how it does from factory is the most important part of our PCV system, especially for a street driven car. Don't want to end up like my friend's Buscher 2.3 in his Evo when he thought it was all about the evac. Luckily he caught it in time before he ruined that motor. The oil was fuel contaminated and all the stagnant gasses that were in the case under normal driving conditions made his oil sludge up so bad that we had to scrape about 2 quarts of it out of the pan. It was scary. He thought as long as he had ventilation for case evac during WOT that he was fine.

 

thanks for giving me a visual

 

Well 9 hours ago it was in 40's and I was doing pulls, and now its snowing and cold....dumb! Tomorrow is supposed to be back in the mid-high 40's so hopefully we don't get too much snow today. I hate this **** lol

 

High today low 50's. High tomorrow 25. Fml.

 

I'm so nervous about my turbo. Any update to what BW is gonna do/say? Mine better work. Stressing me out. I'll know in about three weeks. If it was anything like my last turbo (s259 batmowheel), they dicked me around big time. Wasn't happy.

 

I shipped it out Friday, so it will be at BW on Wednesday, then they will have an update for me shortly after that I'm hoping. I truly do believe it was just a manufacturer defect, but they should be able to find out for sure. I just can't think of anything else that would make a reverse thread nut back off. I've had Cody's turbo on here for 200 miles with no problems. Might see if I can pay to upgrade to the batmowheel when I get it back.

Also, I took a short video on 17 lbs last night, so I'll get that loaded up shortly.

 

I thought the s259 from zzp only came with the batmowheel?

 

I had the cast wheel, so does the one that is on the car now.

 

Here's a video I made last night on my way home. 36* outside but I wanted to at least show you guys something since videos have been demanded! Its only on 17 psi right now, but here is a little pull from 45-100.

 

mmmmmmmm yummy

 

Also, my new plates!

 

That's sweet! I wanna get "9 psi" lol

 

awesome plate. love the video. i commented so you can sub to my channel