05slowbaltss

My mods are listed below...

If I buy a stage 2 pulley kit on the internet for 90$ that consists of the hub, 3.0 pulley, Allen key, and the hardware and install that on my blower and then bring my car to chevy and get the reflash done. Will that work out for me? I mean i'm not doing anything drastic where I will need bigger injectors, maybe some NGK one step colder plugs. Lemme know if ill see any gains and if so what will they be. Below is the site where I am ordering the pulley from.

http://www.smoothflowpulleys.com/Stage2.html

roser4888

With that pulley you want to run bigger injectors and when you get the stage 2 kit from gm theres a number that the dealer has to put in for the flash. You shouuld just get the gm stage 1 which has the tune then get the pulley later.

05slowbaltss

I dont wanna spend 400$ on it. 90$ is good for me lol. I think our stock injectors can handle a .35 difference in pulley size.

silver187666

your stockers are pretty maxed out enless you are runing 42s allready

roser4888

Even with a tune you gonna run lean, especially with the intake. Your putting alot more air but no more fuel.

RA040424

iTrader: (1)

You really have a thick thick thick thick skull dude, makes your brain obviously very small. You tend to think you know everything about your cobalt and what it can "handle", so why post threads asking for advice or information if your not going to listen. go ahead, you can actually run a 2.6 on stock injectors it actually works out really good. More air then fuel means better gas mileage anyways, you know?

Karlen89

iTrader: (1)

Go ahead with it, noone here will give a sh@! when you **** your motor up.

We'll just sit back, and say told you so. Have fun.

RA040424

iTrader: (1)

Want me to grab some pop corn?

Snakes709

Man this guy is retarded. STOP POSTING USELESS THREADS! Stop being a cheap ass and pay for your mods. Ever hear the expression "you get what you paid for" A. with a $90 pulley you arent going to see any gains. B. your IDC is high enough, you could go static. C. Go drive a honda

ShortStack

Your gonna need injectors to drop pulley size.

end of story.

RA040424

iTrader: (1)

ShortStack

^^ lmao...

I loved how he said some **** to d4u about his carbon fiber hood being "gay ricer, shut up lol"..

Then he asks about a hood scoop...

RA040424

iTrader: (1)

He's a ricer at heart.

Rydis

you were already told by a vendor, one that is really respected on this forum, and builds with the motor that you shouldn't till you upgrade the injectors. Why keep asking?

383_Stroker

iTrader: (3)

Incase the other 10 responses haven't swayed you..

You're wrong..

K thx

Kazuki

Why do you think the GM stage II kit comes with 42's??? Because YOU'LL MAX OUT YOUR INJECTORS. Hell, the stage I, before you even drop the pulley size comes with 42's! You pay to play dude. You'll end up spendin more money repairing your blown up **** for being ignorant.

Snakes709

i agree with you. Also dealerships are pretty ******* stupid and even they are smart enough to add injectors...lol

chevysssc

iTrader: (2)

i hope the harshness of these guys made you realize you need bigger injectors. also smaller belt

RA040424

iTrader: (1)

^^ that guy is out of the loop I'm guessing

ralliartist

I think the rest of you have handled the "********" comments for me. lol. No need to intervene here. What a *******.

~Mike~

iTrader: (2)

possibly a good guess


So, i wish someone woulda told me all you had to do was put on a smaller pulley and drive away. I wouldn't have sold my 2.8

souchak2112

Looks good man, but im not a fan of the white brow aross the windshield

MrSlickSter06SS

I think you guys hurt the guys feelings....

~Mike~

iTrader: (2)

oh well....that's what happens when you keep asking the same question over and over til you get the answer you want. If you're not going to accept the answers ppl give you, you shouldn't ask the question

MrSlickSter06SS

I guess your right but I guess to you could have (not singling you out..) approached it a little better than that the guy obviously don't know what he's talking about, and a little more persuasive words could have been more useful...