13.2 PSI @ 6,500-7,000 RPM's in 3rd gear....Stock pulley.. stock injectors... mods in sig...

later

 

0 at 6.5 rpm

 

close to 17.0
@ 7000 RPM
mods in sig
close to sea level

 

t3/t4 .57 trim
24psi when the waste gate holds boost

oh yeah like 15 ft above sea level

 

stage 2
15.5RL

 

14.5psi @ 7000 rpm. stage 2 (3.06") pulley.
16 psi @ 7000 rpm. nate's 2.9" pulley

 

not fair ur turbo'ed lol

 

ported blower, 2.55 inch pulley

5.4 psi at 6400 rpm. 20 ft above msl.

 

 

stage2 15psi@6500rpm

exactly 640ft msl

hopefully i'll be 16psi with the stage 3 pulley soon.

 

18.5 stg 2 colder plugs magnaflow catback k&n cai great tune bu db performance and the screw by the supercharger up a long ways

 

18.5-19 psi all day.

2.7
HPTuned (Doc)
dual pass
few other things at sea level

 

2.7 inch
6900 rpms
18 pounds i think we got... and it was in queens so like 10 ft above sea level lol.. seeing a little more boost at night with the colder air temps

WHAT!? lol how are u boosting 8 pounds under stock with a pulley that is an inch smaller then stock lol

 

If what I have read in previous threads about this. Unless you have done the boost bypass mod or have changed the values limiting boost with HPtuners you are all boosting 12 psi no matter what your boost gauge reads. The bypass solenoid bleeds off access boost once you hit 12 psi.

Now I could be wrong but I don't think I am. check it out on the HPtuners Forum and ZZP canned tune states that they also removed this.

cheers

 

i was boosting 13 stock... read it with the interceptor... actualy it was 13.4 lol

 

stock

13psi

 

17.5 psi at 6800 rpms, 2.85" pulley, K&N intake, header back exhaust!

 

stage 2
CAI
Exhaust
17 psi @7000

 

something is broken lol. Haven't had too much a chance to go over it yet, gonna take a more detailed look tonight, but screw it, turbo time

 

2.8
17.5 Psi

 

hmm thats never good to hear for the explaination... somethings broken haha btw i might come down friday for this amazing long island meet!

 

good **** man, I'll be out there. Easiest way take the LIE (495) east to exit 52, make a right at the light, follow rd onceyou go over train tracks, make left at light, and right into lot. We will be in the back corner



now back to your regularly scheduled post whoring

 

16.69 psi with Nate's 2.9. Looks familiar doesn't it Paul?

 

how do you boost over 18 with the stock stgII pulley.?
i think not

 

i sure do before i got stg 2 i bought a 3" press on pulley and i had 18 pounds with all the mods except the cat-back