http://cgi.ebay.com/ebaymotors/05-08...QQcmdZViewItem
go figure after i spend the cash on fujita, the ebay intake re-appears

 

Repost, it is ify if it has MAF bung

OK I found a thead were someone has tried it https://www.cobaltss.net/forums/show...ht=ebay+intake

 

i know its a repost, i was around for them...just saying they have returned on ebay after hiding for quite some time, as a cheaper then name brand alternative

 

i emailed this guy twice, the first time i asked if it does have the maf sensor bung and he replied with a no. last week i asked him if the intake was exactly the one in the pic and he said yes, so i ordered one ill post when it arrives with the verdict, at the very least ill get my money back due to false advertising.

 

good luck, i would if i wouldn't have ordered fujita yesterday..

 

I ordered my K&N for my 2.2 for $185 +$20shipping brand new..

 

where at?

 

matt traded me his ebay intake and it works geat except for my maf sensor harness was too short

 

yea for this price im planning on hacking it into a short ram intake and hopefully avoid the cel's

 

From a friend of mine who owns a shop out in Boise, Idaho..

I was about to order it from ebay but dam, its basically retail... soooooo i called him up like a month ago and he was finally able to get one in stock for my car and i payed him by credit card and he finally shipped it out to me.. should b here on wednesday

 

Keep us posted

 

i sent the guy a message and he said it was exactly as pictured...ut let us kno how it comes, take pics b4 the intall and after, and everything, i have a gmpp but i might still get this just to have a CAI lyig around...

ps-yeah this intake disappeared for a long ass time, i used to see it alot when i first got my car, than once i had the cash to buy one, yaam, gone...

 

Here is the thead I was looking for https://www.cobaltss.net/forums/show...highlight=ebay
it's been about month I didn't think it had been that long. NBD anyway

 

yeah but that thread didnt answer on the questionabout it actually working, and no one ever ordered to check if it did...so maybe this will will give us some asnwers

 

I hope thats a generic pic with the MAF down by the filter.

If its not, how are you supposed to extend the MAF into the fender and to the intake?

sounds like a PITA to save some money.

 

yeah hopefully the MAF adapter isnt that low, or else we're fucked, cuz its not gunna reach that far down...but we'll see, when this guy gets it in...hopefully it is a generic pic and its not like that, i remember about a year ago saw the ebay intake up close, this guy here had it on his cobalt, and it looked fine...so hopefully its the same one they're selling now

 

Yeah i emailed them, i want one because i dont wanna pay almost 300 for a damn intake.

 

on ebay there is fujita for like $230 obo brand new, i offered them $190 shipped and they accepted it

btw good to see another WI guy, i frequent beaver dam often so maybe ill see you somtime

 

PICS BELOW!!!!!!!!!!!!
Hey guys, I just got my $60 intake from ebay haha (muwahahahah just isntalled it too). First things first....this thing is not perfect. It has some dings, some scratches. - 2nd, you will want to buy a piece of rubberbecause it is super close to a black piece of metal(left side front camshaft) on the motor, so to keep it from scratching, get a piece of rubber and put it on there with 2 pipe clamps. 2nd, the picture has the MAF location backwards, that part actually sinks into the fenderwell is right. and the MAF sensor is right too. 3rd - You will need to file this thing down a little bit, along the welds to make sure theres no extra metal chips that will fly off (there were 1 or 2 on mine) and then for the MAF sensor (the cut into the pipe is just like 1 or 2 mm too small for the MAF to fit, so, straight file it out and bam....its in.....and lastly, the edges of them are not perfect, so you can file those down too. otherwise than that, this thing SUCKS (cold air that is). It also mounts to a bolthole in the body to hold it out away from the motor. Mines Great!!!!!!!!


BY THE WAY THE PIPECLAMPS ARE PIECES OF $hit, better off getting your own.

PICS BELOW--------
MOUNTHOLE!



Happy Ebay Hunting!!!!!!!!!

 

i have one of these, the bracket that holds it to the fender broke, and rather than fix it, i bought a K&N. if anyone wants, they can have it. PM me

 

this will work on a 2007 2.2L?

 

i doubt it.

 

Thats what i thought...damn.

 

well, actually, you CAN disable SRI... but... why?

 

huh?
now im lost?