Hey folks!

Our new 2.2L Ecotec Stage 1 Turbo Kit for the Cobalt is now ready! This kit includes:

Components:
Garrett T3 Turbocharger
Tial External Wastegate
Manifold with wastegate welds
Greddy Type S Blow Off Valve
Charge Pipes (w/custom welds for blow off valve)
Oil Feed Kit
Oil Return Kit
Vacuum Lines
Manifold Gasket
T3 Gasket
Silicon Boots & Clamps
Bolts, Nuts, Washers, & Necessary Hardware

Power Gains:
4-5 PSI Range
50 Horsepower Gain

Warranty Information:
Turbo – 2-Year Warranty
Manifold – 1-Year Warranty


The compressor wheel is a T3 60 trim and the compressor housing is a 42ar . The turbine side is a 48ar with a standard T3 flange.


Please note: The only item this kit does not yet include is the downpipe. We can include the flange for the downpipe for an additional $50. From there, any exhaust shop can weld on a pipe after you install your kit for a simple $80-$100.


Pricing: $2299.99 + Shipping > $2340 SHIPED
Pricing (with downpipe flange): $2349.99 > $2390 SHIPPED











This kit will *NOT* throw any codes, check engine lights, or anything of the sort. The piping will include a slot to adapt the air intake sensor.

Once your order is placed, please allow up to 3-4 weeks for delivery because of manufacturing time. We do NOT manufacture these until an order is placed and paid for in full.

Thanks to everyone that's supported us and been interested along the way! This is a great community and we hope to offer even more products for the Cobalt in the upcoming months

 

looks very nice...

 

Hey Frank,
You list an intercooler warranty but the stare 1 does not include a warranty. Is the intercooler available yet and/or can I use any intercooler I want? I also want to say thanks for what you have to for the aftermarket for this car.

 

hey, when r u gonna have a downpipe for sale and stage 3. also how many kits like this for other cars have you sold.

 

Looks good, not really sure about the 50hp gain though with only 4-5psi.

 

Thanks man! Sorry, I messed up The intercooler is not yet available for this since we don't have the proper piping for it. I can send you the intercooler, but not the intercooler piping that you'll need...


twandamon - The Stage 3 and downpipe won't be able for a few more months. Thanks though By the way, we've sold over 20 kits so far.

Marc - Depending on supporting modifications, it's usually suggested that 1 PSI = 10 Horsepower. Therefore, with 4-5 PSI, you should be in the 40-50 HP Gain.

 

would this kit fit the 2.2l saturn 2005 ion

 

This kit is designed for the ecotec. However, we do have the same exact kit for the 2.2L available with the same pricing. E-mail us if you're interested: sales@maximumboost.net

 

I guess this is safe to run non intercooled. Also, have you installed this setup on a cobalt yet?

 

We've installed this kit on the 2.2L Ecotec Cavalier, but not the actual Cobalt yet. The Cavalier motor is exactly the same, and I have already confirmed from my distributor of the manifolds that the only difference is the fitting towards the firewall for the manifold and turbo. These manifolds have the T3 flange aimed down more so that it will clear the firewall with no issues. Also, the piping has the flange on it for the intake sensor...these are the only differences.

Thanks!

 

when the stage 3 kits becomes available, u offering any special price discounts to the people who have purchased this stage 1 kit. also does this come w/ a boost gauge for the inside of my vehicle?

the whole setup looks great, really considering this but lil high on the price for me

 

frank man, please get a vid of that cavi or something, if u get put another one on a car get a vid of it like a walk around and then driving it. if thats kool and if u can of course. im patient i dont care how long it would take.

 

I doubt I can man...stupid, I know. We didn't get pictures or anything, and that customer's car is GONE. I need to find a test cobalt in our area...

If anyone's interested and in Florida, we'll give the kit to you for $500 OFF if you let us install it on your car


Deuce - Yes, if you get Stage 1, you can always upgrade. We don't charge too much for the parts seperately. By the way, our boost gauges are only $50 extra

If you're interested in the kit, e-mail me. I'd be more than happy to work on the price for you: sales@maximumboost.net

 

what part of Fl you in?


____

 

We're right near Orlando. I just replied to your email by the way...

 

Oh darn im in st. petersburg


___

 

Dumb question- Will this turbo work for the non S/C SS 2.4L?

 

thats a pretty good price, especially, shipped, and 4-5 psi would be good for someone wanting maximum hp from a low $ power adder. I think I'll wait to see what kind of numbers both hp and $ that can come from the stage 3. Until that comes out though great job, and thanks for coming out with products for the cobalt.

 

Actually, the only difference is the manifold. So yes, we do have them available for the 2.4L


Thanks guys!

 

what about engine managment and fuel managemnt, greddy emanage would be nice to go with this

 

A Greddy E-Manage can be added for an additional $400

 

So are you running the piping from the turbo directly to the Throttle body?

 

Yes, that is correct.

 

this kit looks beautiful !!! Thank You for supporting the Cobalt with your aftermarket parts. I hope to see this kit installed soon!

 

I would not buy any product that has yet to be tested on a Cobalt. Please do us all a favor (including yourself) and test the kit on the Cobalt before you advertise it for sale!