got the balt dynoed ;)
02-13-2012, 12:39 AM
#1
Member
Thread Starter
Join Date: 01-19-10
Location: santa fe
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
got the balt dynoed ;)
i have a l61 custom turbo kit i have bin driving it about 7 months it has bin holding up fine but just recently got it dynoed more than expected thats for sure but it runs great i built it myself and i baby it i barely boost. i have all the parts needed to build the bottom end but just getting money to build it this summer and i rarely drive it at all and i have another truck so i dont drive it more than nessesary. but it has some power its currently putting down 10 psi with the custom turbo kit i made.
02-13-2012, 03:06 AM
#7
Member
Thread Starter
Join Date: 01-19-10
Location: santa fe
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Ya me either but I had extra piping and couplers and I thought it would be better for heat soak over the valve cover and it must work pretty good with these numbers
02-13-2012, 11:07 AM
#11
that is WAY too lean if it's on no meth.. unless that dynos wideband is totally off you need to get your tune looked at .. **** idk whoe tuned your car but if vince knew it was mid 13's wot he would be shitting himself.. and PLEASE for the love of christ tell me you actually have a wideband
02-13-2012, 08:37 PM
#19
i have a l61 custom turbo kit i have bin driving it about 7 months it has bin holding up fine but just recently got it dynoed more than expected thats for sure but it runs great i built it myself and i baby it i barely boost. i have all the parts needed to build the bottom end but just getting money to build it this summer and i rarely drive it at all and i have another truck so i dont drive it more than nessesary. but it has some power its currently putting down 10 psi with the custom turbo kit i made.
