Red07SSNA

If you think the Jet Chip Performance Modules caused some controversy...check out Jet Chip's new Power Control Module #68021.

This is a new product that JEGS will be selling next week ($194 price increase since posting). According to the Jet Chip Website the performance module gives you some basic information and allows some tuning of spark and fuel control.

this should start some heated debate on CSS.net

http://www.jegs.com/i/JET/561/68021/10002/-1

DISCLAIMER: I am not responsible for price increases of any item I post about from any vendor's website

OrngBalt

You havent even mentioned the High Flow MAF sensors they offer as well. lol

maverick0716

I hope they'll have some major restrictions on how much you can modify the spark and fuel control.......this is not a toy, and it's not child's play. I can see many engines having premature failure.

Dunkinuts

how does this differ from the other thing they sell?

umrdyldo

iTrader: (1)

well the module are already pretuned on the old setup, this would allow you to advance the timing and fuel yourself

Dunkinuts

so do i need the chip to use this new thing?

Red07SSNA

That's because it has already been mentioned in other posts of the Jet Chip module

No...it is a stand alone module -- kind of a replacement for the Performance module.

Brand new -- just came out with it that's why they haven't put any more into the Performance modules. JEGS told me they should have them the 29th.

Nothing wrong with being wary. Since Jet Chip has been making electronic performance stuff for GM cars since the 80s I would trust them far more then someone who just bought HPTuners and tells me they can super-tune my ECM -- no thanks.....

Dunkinuts

^^^ yeah i agree about the letting someone just "tune" my car.


yeah i will def. look into this.

OrngBalt

what models is it for?

maverick0716

The funny thing is that those Jet chips don't give you perfect A/F ratios and fuel mapping like you think they do.

Dunkinuts

^^ and you know this.............how?

maverick0716

People (not me) have checked them with HPtuners.

CobaltBuddy

People.....sounds official

Red07SSNA

AND THEY'RE WRONG. Since the Jet Chip Module is a piggyback that changes what the ECM is putting out how do people with HPTuners know they are reading the ECM or the modified signals? I'll accept info like this from someone who has has a "sniffer" up the tail pipe to give real information.

People on this site that use HPTuners tend to promote the HPTuners and don't want to accept that the Jet Chip Module works -- Why? Because they could make money off their HPTuners by tuning other owner's cars. A little one-sided don't you think?

How about we make an agreement? -- People that want HPTuners get to read threads about HPTuners and I won't jack those threads with "should just get a Jet Chip Module -- it's less of a headache then HPTuners" and people that are interested in Jet Chip Modules/Control Modules won't have to read "Should get HPTuners -- it's better" in every thread.

Dunkinuts

hey red you said the 29th for a ship date or in stock date?

I emailed Jet about it, they normally take about 24 hours to get back to me. I will def. be looking at being one of the first to have this.





also do you know if that will work on a '08? or a cobalt in general since we do have a chip out?

Red07SSNA

JEGS techline said 29th is when they expect them in.

All I know is what we can read on the Jet Chip website -- Ive been waiting for a response to an e-mail also.

Black07SS

subscribed

maverick0716

Someone really has to do some before and after dyno numbers with these things.

yoshosan55

So where does that thing plug in? And would I have to run wires through my fire wall? or does it plug in under my dash?

Red07SSNA

If you are asking about the stage 1 and stage 2 performance modules, they plug into the 06 and 07 2.4's ECM center connector and then the center wire harness attaches to it (no wires).

The 08 2.4's ECM is different and it doesn't appear to work on this engine/ECM combo yet. There is another thread on this and we are waiting for results.


If you are asking about the new tune-able module, I haven't gotten any info from Jet Chip yet and only have the little info they have on their website -- which isn't much. I imagine it attaches to the same connector -- but then you would have to run wires into the passenger compartment to hit the buttons.

Dunkinuts

I was thinking it connects to the OBD port under the dash.

Red07SSNA

I talked to Alford at Jet Chip. He said the new performance module has wires that run into the engine compartment and needs to be connected to multiple items: MAF, power source, ground, etc.

For now I'll stick with their "plug and play" stage 1 module

riko540

correct me if I'm wrong but the control unit only allows you to monitor your diagnostics not change anything. The performance module is the "tune" which changes the air/fuel ratio etc. right?

originaladrian

any info on this yet? anyone buy it?

and BTW this is 349$ on JETs website and 194$ from jegs.

hackeragent061

so which is better for gettin more power the new "JET Power Control Unit Plus & V-Force Plus" or the "JET Power Control Modules for GM Cars" that says it will add HP?

http://www.jegs.com/i/JET/561/68021/10002/-1/1061694

http://www.jegs.com/p/JET/748553/10002/-1/10373