Any Victory Red w/ Silver Stripes?
Any Victory Red w/ Silver Stripes?
I've found one picture of a red SS with silver stripes, I was just wondering if there were more out there. I'm going ot be using (at least the plan is) metallic silver vinyl and do two stripes about 8" wide down the middle, and I was kinda hoping to see any other pictures out there.
THANKS!!
THANKS!!
sweet, what do you charge to make up something like that? i would def be interested in ordering some stripes from you for my car. but they would have to just be stripes and not pre cut since i have a body kit
Vinyl itself is pretty cheap, most of what I charge locally is labor. Depends on if you need it for the entire car or just hood, roof and trunk and what kind of vinyl you want as far as color. The metallic stuff I'm using is more expensive then just flat colors.
Also this is what I'm thinking for design for the hood. Start it 2-4 inches away from the front of the hood and go all the way back with the smaller stripes around the outside. What do you think?
Also this is what I'm thinking for design for the hood. Start it 2-4 inches away from the front of the hood and go all the way back with the smaller stripes around the outside. What do you think?
Last edited by 06_SS_S/C; Jul 26, 2007 at 12:37 AM. Reason: Automerged Doublepost
i like the pin striping on the sides of the stripes. cool design but im looking for it to right up to the edge of the hood, down the front of the bumper, back to the roof, the trunk, the wing, and down the back bumper
Last edited by xCobalt05x; Jul 26, 2007 at 12:41 AM. Reason: Automerged Doublepost
Ya, that is what I'm just planning on doing for my car.
I can go out and measure and see what the total length would be and get you a price. The only silver I have is metallic, so it isn't going to really match that well I dont think. I have a flat grey that might be a closer match. I will go out tomorrow in the sun and see what looks closest.
I can go out and measure and see what the total length would be and get you a price. The only silver I have is metallic, so it isn't going to really match that well I dont think. I have a flat grey that might be a closer match. I will go out tomorrow in the sun and see what looks closest.
dam dude y not become a supporting vendor and make vinyl things for people on here, such as eyelids many different designs, stripes also many different designs, and maybe headlight smoke vinyl and tailight smoke vinyl
Vinyl itself is pretty cheap, most of what I charge locally is labor. Depends on if you need it for the entire car or just hood, roof and trunk and what kind of vinyl you want as far as color. The metallic stuff I'm using is more expensive then just flat colors.
Also this is what I'm thinking for design for the hood. Start it 2-4 inches away from the front of the hood and go all the way back with the smaller stripes around the outside. What do you think?

Also this is what I'm thinking for design for the hood. Start it 2-4 inches away from the front of the hood and go all the way back with the smaller stripes around the outside. What do you think?

The one thing you have to be careful about with metallic vinyl is it'll fade something fierce in the sun. I work at a sign shop and just last month I replaced stripes on a guy's Grand Prix that were gunmetal metallic on a red car. They look great when new but his old stripes were faded so bad in spots that they looked almost white. Maybe if they had some UV guard on them it might help.
The one thing you have to be careful about with metallic vinyl is it'll fade something fierce in the sun. I work at a sign shop and just last month I replaced stripes on a guy's Grand Prix that were gunmetal metallic on a red car. They look great when new but his old stripes were faded so bad in spots that they looked almost white. Maybe if they had some UV guard on them it might help.
Thread
Thread Starter
Forum
Replies
Last Post



