Gen 4 Projectors
Good thinking! Thanks guys, I think i'm gonna go with these gen 4's and a HID Kit from DDM Tuning.
Im leaning towards 35w 4300k or 5k. I want that bright white, very little blue look. I was thinking about 55w but I dont think there needed.
Another noob question, okay so our stock headlights have a high and lo bulb, so do the gen 4 projectors have a wiring harness that splits the one connector coming in to allow for the two seperate hi and low bulbs?
Im leaning towards 35w 4300k or 5k. I want that bright white, very little blue look. I was thinking about 55w but I dont think there needed.
Another noob question, okay so our stock headlights have a high and lo bulb, so do the gen 4 projectors have a wiring harness that splits the one connector coming in to allow for the two seperate hi and low bulbs?
Last edited by bmaynard06; Dec 29, 2009 at 05:37 PM. Reason: Automerged Doublepost
another thing with the high beams, is that if you flick them on, they will have to warm up for 10-15 seconds. ha ha pretty pointless. these came stock with phillips bulbs, and they arent bad at all in the high beams
Another noob question, okay so our stock headlights have a high and lo bulb, so do the gen 4 projectors have a wiring harness that splits the one connector coming in to allow for the two seperate hi and low bulbs?
I'm close to buying these just making sure I have everything straight
I'm close to buying these just making sure I have everything straight
Yes pics pics pics! I'm interested to see more cutoff pics. I've only seen one guy with them installed with hids
EDIT: Just took the plunge and went with the 4th gen! I was debating between just using the stock housing but dont like the glare. Hopefully the cutoff will be okay with these. I went with a DDM Tuning 4500k HID Slim Kit with the relay adapter just in case!
I'll post up some pics when i get them and install them!
EDIT: Just took the plunge and went with the 4th gen! I was debating between just using the stock housing but dont like the glare. Hopefully the cutoff will be okay with these. I went with a DDM Tuning 4500k HID Slim Kit with the relay adapter just in case!
I'll post up some pics when i get them and install them!
Last edited by bmaynard06; Dec 30, 2009 at 01:07 AM. Reason: Automerged Doublepost
so does anyone have a 1-4 gen picture to show them all off for someone like me know didnt know there were more than 2
i think ill get a set of those
i think ill get a set of those
Last edited by freakta; Dec 30, 2009 at 08:17 PM. Reason: Automerged Doublepost
They look kind of like gen2 but they dont have the light-line above the bulbs (an eyebrow?) and the led's actually match the bulbs. And they look sexier to me. If they are gen2 then there must be a reason for those differences.
ebay link
Last edited by TheWarHam; Dec 31, 2009 at 08:43 PM.





