Hey everyone i just ordered 8000k hid kit from 3BSpec: 9007 HID Kit - 8000k
Ballast: 50w Digital Ballast
Harness Options: Plug-and-Play Harness
DRL/Warning Module: No

this will fit my 2007 ls correct?

 

putting HID's in your stock reflector housing eh>?

 

i have stock lights if thats what your asking. i dont know much about hids

 

They'll work.. You'll have to aim them lower. Stock headlights usually glare like a mother ****** when a HID bulb is in place. They look awesome, but you may get some people flashing you because it'll look like your highs are on lol. You should look into getting some projectors.

 

yea i am getting 3rd gen soon but will those hids i just got fit in that or will i have to sell these ones for new ones? i would ask you how to aim them but im sure there are threads about it

 

booooooooooooooo


riiicccerrrrrr

 

Those HID's you just purchased will not work in an after market lights, so yes you'll have to sell them! lol. And yeah, Just look.. I believe smartdude just made a thread on how to aim.

 

HID's work in our housings, aim them down and it won't be too bad. There are a lot of people on here who will say it's dangerous, and how it blinds people blah blah blah...
I would upgrade to projectors if you can afford it, but you will need to switch kits.

 

i wouldnt go to projectos, my 3rd gens are peeling and they are stress cracked pretty bad to

if i was u i would keep stock lights with HID

 

If you keep Stock headlamps, there's a 99.9% chance you will get pulled over. There are only a few cars that have headlamps made specifically for HID's and the Cobalt isn't one of them. My advice to you is get some projectors (ebay for about 180) and go from there. I have 10k on my 3rd G projectors and they are find. There a lot easier to aim than the others, and have a better cut off line. I suggest these.

Make sure that you get the correct bulb sizes for them, usually either H1, or H7 for these projectors.

 

I have HIDs in my stock housing... if you aim them correctly they won't blind anyone... plus a lowered car it'll only blind their bumpers! I have just as good a cutoff as any projector I have seen!

But to answer your question yes the 9007 Plug in play is correct for your car!

 

WTF, show me a pic of ur cutoff,

then tonight ill take a pic of mine, i guarantee u mine is sharper and cleaner.


reflectors flat out SUCK for HIDs, u will get pulled over and every other driver will 1. be pissed of at you and 2. scream ricer out there window to u.

 

Okay gimmie a minute yes yours will be sharper for sure... but mine is clean and flat!

 

This is how they should look

Not actully mine (this is 1st Generation)

 

if you like ricey projectors sure...

 

They provide better light output than reflectors, and avoid blinding oncoming drivers. THEY ARE BETTER!!!! hands down.

 

love em.

 

i hate the projectors for this car
all of them look ricetastic and aren't worth ****
the only way to go is retrofit if you want projectors imo

 

I agree... the projectors from ebay look like ****.... I want to do a retro but will wait untill I get the new car!

 

what it should look like





to be honest i think ebay projectors arent really for HIDs as they're designed for halogens in the first place, so theres really only one right way for hids which is retrofit

oh i just noticed you bought the 50w ballast too. those things are super bright so be really careful with the aiming. they could be super blinding if it glares

 

Retro's FTMFW.... but I'll do it when I have a car I plan on keeping!

 

projectors + hid out perform hid + stock housing too.

I hope you have $600-$700 saved for retro.

 

I am selling a HID kit same exact thing for half the price...GL with it tho!

 

jeeeeesee, wht a troll!!!






























JK

 

gotta sell my parts somehow!