Triple gauge pillar for the Cobalt?
#1
Former Vendor
Thread Starter
iTrader: (1)
Join Date: 07-20-05
Location: Minnesota
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
Triple gauge pillar for the Cobalt?
Who would be interested in getting a triple gauge pillar made for your car? We need atleast 30 interested to get things rolling.... so let's see what we got
#6
I would like to have a total of 2-3 guages including the boost guage we have stock. I would want 1 for vac. and the other for either air/fuel ratio or volts. But yea im interested
#19
I'm old school
Very interested. I looked into this about 4 months ago and nobody was making any. Autometer has said they have no current plans to produce any, but I have to believe that might change.
I have questions. What color? Will it match the beige / tan color of the factory A pillar or will it be black? Or some other color? Will it be the standard 2 1/16" size? Will you make a universal kit, or will there be two different models for the side air bag / no side air bag cars (they have different A pillars)?
I have questions. What color? Will it match the beige / tan color of the factory A pillar or will it be black? Or some other color? Will it be the standard 2 1/16" size? Will you make a universal kit, or will there be two different models for the side air bag / no side air bag cars (they have different A pillars)?
#21
Former Vendor
Thread Starter
iTrader: (1)
Join Date: 07-20-05
Location: Minnesota
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
Whoa... sorry for some of the confusion this may have caused.
This pillar will be a triple gauge pod that would hold any gauges you might want (2" or 2 1/16"). Full pillar replacement.
Price would be around $44 for black (unpainted) or $51 for painted (like stock interior color).
If there's interest, like it seems like there is... we'll get the manufacturer a stock pillar to work with, and they'll mock up the three gauge holders. Then once that's all done, it's usually around 1 month before they are ready to ship.
We carry Auto Meter, Stewart Warner, Dakota Digital, Glow Shift, etc, etc. Basically any brand gauge you could want... We also have gauge hole caps that can fill an empty gauge hole for temp if needed.
This pillar will be a triple gauge pod that would hold any gauges you might want (2" or 2 1/16"). Full pillar replacement.
Price would be around $44 for black (unpainted) or $51 for painted (like stock interior color).
If there's interest, like it seems like there is... we'll get the manufacturer a stock pillar to work with, and they'll mock up the three gauge holders. Then once that's all done, it's usually around 1 month before they are ready to ship.
We carry Auto Meter, Stewart Warner, Dakota Digital, Glow Shift, etc, etc. Basically any brand gauge you could want... We also have gauge hole caps that can fill an empty gauge hole for temp if needed.
#22
Former Vendor
Thread Starter
iTrader: (1)
Join Date: 07-20-05
Location: Minnesota
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
The pillars w/ air bags & w/o... as well as 2 & 4 door will all have to be checked to see if gauge pillars can be made & will work. I was just checking to see if there was even interest for an item like this. It certainly seems like there is.... and we'll get something rolling shortly.