updated pics: wingless and stipes (nice combo)
#1
Senior Member
Thread Starter
Join Date: 04-29-06
Location: charlotte, nc
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
updated pics: wingless and stipes (nice combo)
this was my car before
nice... this is now
yes i used vinyl they are 8.75in wide and 2in from each other, i just spend $35 ( my cheapest mod yet) and did it my self took me 4 1/2 hours
im still wating for the vinyl to dry so i can do the finals touchs and wash the car
Note: if nothing good to say move on pls
nice... this is now
yes i used vinyl they are 8.75in wide and 2in from each other, i just spend $35 ( my cheapest mod yet) and did it my self took me 4 1/2 hours
im still wating for the vinyl to dry so i can do the finals touchs and wash the car
Note: if nothing good to say move on pls
Last edited by stg2cobalt; 03-21-2007 at 11:59 AM. Reason: updated
#7
Once you get your sportlines on, it will definately complete your car. Good job with the stipes too. I want your eyelids in red!! gimme gimme gimme!!!
But you have another non-supporter of the de-winged look right here. Makes the rear end look nakey
But you have another non-supporter of the de-winged look right here. Makes the rear end look nakey
#9
Senior Member
Join Date: 01-24-07
Location: Hopkinsville, KY
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
#10
Senior Member
I think it does look good. As everybody else said... shorter antenna & it will look even better. I like the look where the stripes go all the way down the rear bumper.. but that's me. Looks good though!
#12
It really isn't that hard. You just put the strip on and get all of the bubbles out and then use the body line around the License Plate hole as a guide, running your finger along it while you cut the stripe. Anyway it was easier than it sound or looks.
The stipes look great. I have to say that since your's were inspiration for mine.
The stipes look great. I have to say that since your's were inspiration for mine.
#13
Senior Member
Thread Starter
Join Date: 04-29-06
Location: charlotte, nc
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
It really isn't that hard. You just put the strip on and get all of the bubbles out and then use the body line around the License Plate hole as a guide, running your finger along it while you cut the stripe. Anyway it was easier than it sound or looks.
The stipes look great. I have to say that since your's were inspiration for mine.
The stipes look great. I have to say that since your's were inspiration for mine.
#15
i dont think it would have looked right with the stripes down the back, the lisends plate area would have been too big and taken too much area through the stripe. you would have only been able to put part of a stripe through there
#16
Senior Member
Join Date: 05-03-06
Location: new jersey
Posts: 4,638
Likes: 0
Received 0 Likes
on
0 Posts
you should paint the bowtie black, or silver like the stripe.
p.s. black cobalts are the best.
oh nevermind... i see now that you did. sweet
p.s. black cobalts are the best.
oh nevermind... i see now that you did. sweet
Last edited by chevysalesman614; 03-21-2007 at 01:14 PM. Reason: Automerged Doublepost
#17
Senior Member
Thread Starter
Join Date: 04-29-06
Location: charlotte, nc
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
#21
Banned
Join Date: 09-21-06
Location: saint john,indiana
Posts: 4,368
Likes: 0
Received 0 Likes
on
0 Posts
i really like the strips but why do you have it going all the way to the bottom of the car in front but not in back???? that needs fixing up otherwise its hot!!
#25
Senior Member
Join Date: 09-19-06
Location: Voted by the people, most likely to get pulled over by a cop
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Carlos, the stripes look great! When you were over last week it was the first time I had seen a Balt w/out a wing and I thought it looked really good. The stripes are kick ass though man!!!
We need to get you in the group with Streak and the rest. =)
We need to get you in the group with Streak and the rest. =)