Heres the link

https://brokedickracing.3dcartstores...T_p_8472.html#

 

nice prices this might be next on my list

 

subd for later use...

 

noob ? do u have to weld it all together? does it come in pieces?

 

Some welding required. It will come in a big flat box with the preformed main loop and all the bars separate. If you just want a 6 point you can leave the side bars out.

 

its only $10 more for the cross bar and side bars same shipping

 

Did you get it in ERW or DOM? (or 4130)

 

Thats how I bought it. Im going to use it for a template to bend up some moly that I have left over from the door slammer days. Ill find a use for the extra tubing.

 

i asked before but cant find the thread but is that a turbo T.A. or a 350? i had a 87tpi T.A. miss it badly

 

very nice, saved

 

sub'd

for that price that might be next on my list!

 

Its the 350 TPI. The turbo was in 89

 

Keep in mind that it's a drag bar, not made or approved for road racing.

Also, you'll need a fixed back seat and harnesses, unless you want to run the risk of your head hitting a bar... The stock belt and seats will be unsafe.

 

What seat are you using ?

 

So, what exactly are your plans for this car??

 

Stock. I don't run a bar/cage in my Cobalt. If you want to go cheap, you can get a Kirkey, but FIA approved would be better and safer. I'd vote Kirkey over a steel tube frame FIA approved seat. If you can find a fiberglass approved seat that fits, and isn't too much, go with that. I haven't shopped for a seat in ages, so I couldn't tell you current models.