NAME: Billy McCoy
LOCATION:Pittsburgh PA
CONTACT: pm me or post

Up for sale is my s2000 in order to fund my FD rx7 build. It is indy yellow and looks great besides a few knicks in the paint and the lip could use a respray.
The car has 93k miles on it and belonged to tech7427 on the forum before me, which was a well respected member on s2ki. The interior is like new besides a few wear marks on the driver seat but nothing major at all.

Car made 581whp/357tq on the last dyno it was on on 22psi on pump gas. Car was tuned by John Kerr at innovative motorworks. Has been boosted for about 15k miles and the new turbo has about 300 miles on it. HAs another tune but have never used it and you dont really need it in this car haha

The shave and tuck was done by me. All of the holes were filled with metal and all custom plates were made to fill in the bay. There is very very little bondo in this bay, what i did use instead of regular filler was "all metal" which is an aluminum filled filler that is much stronger. PAinted with basecoat, peral midcoat, and 3 coats of high gloss clear and looks fantastic.

This bay literally draws crowds to the car. Im looking to get 20k obo for the car. The bay has 200+ hours of work into itself

Appearance
- Vis Carbon Hood
- OEM Front Lip
- Seibon Carbon Trunk
- SOS hood dampeners that hold the hood at a high angle for shows
- Spoon shift knob
- Full Blown Motorsports radiator stays

Suspension
- Tein Type Flex coilovers

ICE

Pioneer Head Unit w/ i pod cable
Alpine Type s door speakers

ENGINE
- Stock F20C Bottom End
- F20C Head Milled/Sonic Cleaned New Seals by Justice Racing
- ARP Head Studs
- Ferrea Valvetrain
- Cometic .076" Head Gasket
- Tucked and Shaved Engine Bay & Custom Brake and Clutch Lines
- Mishimoto 140* Thermostat
- lines are stainless and mounted for the brakes and clutch
- House of Kolor Candy apple red valve cover
- innovative 75A motor motor,tranny and diff mounts
- Mugen oil cap

SETUP
- Precision 825 FMIC polished
- Precision PT6266 .81a/r Billet
- PFabrications ELTM w/ ARP Manifold Studs
- PFabrications 3" Downpipe w/ Integrated WBo2 Bung
- PFabrications Intercooler Piping
- Tial Q 50mm BOV
- Tial 44mm W/G
- Pneumatic push-lok fittings w/ 1/4" air brake line
- Fast-Turbo Vacuum Block
- 4an Stainless Braided lines for Wastegate Boost Reference
- 10an Oil Drain into block girdle
- ALL HOT PARTS COATED IN CERAMIC 2400 DEGREE COATING

FUEL
- Bosch 1000cc Saturated Injectors
- Full Blown Motorsports dual hanger
- dual 340lph pumps
- Full blown fuel rail
- Dual Fuel Pump Relay wired to battery
- Aeromotive Compact FPR
- Fuel pressure gauge on the FPR
- -10an Feed line
- -8an Return line

DRIVETRAIN
- ACT clutch
- PuddyMod Stage 3 Rear Diff, Cryo Gears, Bearing Caps etc
- TRanny case and all parts cryo treated

OIL DELIVERY
- Fast-Turbo Oil Lines

ENGINE MANAGEMENT
- AEM EMS 1052
- AEM Wideband Gauge
- MAC Series 35 Boost Solenoid
- AutoMeter CF Boost Gauge
- AEM 3.5 Bar MAP

before the shave

 

Very nice looking car glws

 

amazing s2k man. i really want to do something like this one day. or at least have a boosted s2k. they are sick glws

 

thanks guys! someone buy this beast

 

Speechless.

 

Very nice, what i wanted to do but no one wanted my balt. glws.

 

I hate this thread.

 

Lock it, lol.


Really nice ride though. My buddy has one thats looks just as sick and a little more HP.

 

Not sure if trolling^
Or complementing....

 

I dont troll, it was a complement on the ride and a statement my buddy has a nice one as well.

 

Neve thought you were really gonna sell this =/. Someone is going to have an amazing honda.

 

my c16 tune makes 787whp

 

i wish youd have this when i get back from my deployment id pick this up in a heartbeat

 

When do u get back haha? Probly won't sell till at least spring anyways

 

why are you selling it i wanted to see it at carlisle last year but it wasnt done and now your selling it.


But GLWS

 

Hmmmmm, AP1 huh? At least its not the gayp2. This looks like a sweet ride man. I'm actually kinda looking for one. I love how Honda built the F20-22 forged completely from the factory.

 

i get back around april-may

 

Sorry bud, I just got back from a deployment, I'll make a offer next month.

 

if someone was seriously interested in the car id take 17.5k for it absolute bottom dollar

 

I would let myself get run over by this car no regrets...glws haha

 

still for sale guys. had a couple awesome trade offers but i really just need the cash as the live axle for my rx7 is in the $6000 range itself. Next is my 10pt cage i need to fund!

 

car is going to be gone in a few days

 

Bump

 

Hey man, are you interested in a cobalt? Mine is built by ZZP. It literally has everything done that ZZP can do to a motor plus a s259 turbo I have an invoice if you interested could throw cash on top.

 

one of the few cars honda did good on