Mark this thread as Unsold
For Sale 2010 Cobalt SS
#1
Senior Member
Thread Starter
Join Date: 06-16-09
Location: Sherrodsville, OH
Posts: 1,179
Likes: 0
Received 0 Likes
on
0 Posts
2010 Cobalt SS
Located in North Canton, OH 44720.
I have a 2010 Cobalt SS up for sale. This car was bought new in 2010 and was built by ZZPerformance. I have reciepts for the build as well as dyno graphs on the car.
ZZP 2.1 forged short block
Upgraded valvetrain
ZZP Stage 1 cams with larger fuel lobe
ZFR turbo (BW EFR modified by ZZP)
3" catless downpipe
3" side exit
ZZP hard pipes
Tial BOV
ZZP intercooler
Tuned by Matt at ZZP
e47 fuel
H&S lowering springs
Moog endlinks
rear swaybar (ottp hardcore bar)
Enkei PF01's with Nitto NT05 tires (fronts are getting low and could be replace, but are super sticky)
Carbon fiber trunk lid
Driver and passenger Kirkey seats (stock seats included, however they will need to be reattached to the stock sliders)
Harness bar
RJS harnesses
Boost, AEM UEGO, Interceptor gauges (car has stock RPD unit in pillar)
Powell Tow hooks front and rear
The bad:
There are some scratches on the paint, mainly a spot on the rear bumper, not all that noticeable.
Front passenger fender could either use some work or replacement. No dents or scratches, but the mounting tabs are bent so it isnt perfectly aligned. Could probably be bent to line up again.
The good:
Comes with all reciepts and dyno sheets, the car is no slouch. It was the second car with that turbo from ZZP. They built the car to make power and it does. All stock parts that i have will come with it (however motor, and any kind of power components, i do not have). Car has 48,xxx miles, and only 2k on the motor and turbo setup.
$18,000 OBO.
NO TRADES ONLY CASH. If interested PM me on here and ill give you my contact info. No joy rides, serious inquiries only and will be able to test drive it. Plenty of people have seen this car and can vouch for it.
I have a 2010 Cobalt SS up for sale. This car was bought new in 2010 and was built by ZZPerformance. I have reciepts for the build as well as dyno graphs on the car.
ZZP 2.1 forged short block
Upgraded valvetrain
ZZP Stage 1 cams with larger fuel lobe
ZFR turbo (BW EFR modified by ZZP)
3" catless downpipe
3" side exit
ZZP hard pipes
Tial BOV
ZZP intercooler
Tuned by Matt at ZZP
e47 fuel
H&S lowering springs
Moog endlinks
rear swaybar (ottp hardcore bar)
Enkei PF01's with Nitto NT05 tires (fronts are getting low and could be replace, but are super sticky)
Carbon fiber trunk lid
Driver and passenger Kirkey seats (stock seats included, however they will need to be reattached to the stock sliders)
Harness bar
RJS harnesses
Boost, AEM UEGO, Interceptor gauges (car has stock RPD unit in pillar)
Powell Tow hooks front and rear
The bad:
There are some scratches on the paint, mainly a spot on the rear bumper, not all that noticeable.
Front passenger fender could either use some work or replacement. No dents or scratches, but the mounting tabs are bent so it isnt perfectly aligned. Could probably be bent to line up again.
The good:
Comes with all reciepts and dyno sheets, the car is no slouch. It was the second car with that turbo from ZZP. They built the car to make power and it does. All stock parts that i have will come with it (however motor, and any kind of power components, i do not have). Car has 48,xxx miles, and only 2k on the motor and turbo setup.
$18,000 OBO.
NO TRADES ONLY CASH. If interested PM me on here and ill give you my contact info. No joy rides, serious inquiries only and will be able to test drive it. Plenty of people have seen this car and can vouch for it.
Last edited by Chase0224; 10-06-2013 at 09:59 PM.
#3
Senior Member
Thread Starter
Join Date: 06-16-09
Location: Sherrodsville, OH
Posts: 1,179
Likes: 0
Received 0 Likes
on
0 Posts
#7
Senior Member
Thread Starter
Join Date: 06-16-09
Location: Sherrodsville, OH
Posts: 1,179
Likes: 0
Received 0 Likes
on
0 Posts
Sorry man I've got enough projects going on I don't have time to part it out.
Send me an email cnewell0224@yahoo.com
Haha I took a little time off from the car thing. Got my camaro back together and running for the time being, getting ready to put the transmission back in my cummins and hopefully put a bigger turbo on that, and just got off overtime rotations at work. It's been a crazy year lol. How you been?
Haha I took a little time off from the car thing. Got my camaro back together and running for the time being, getting ready to put the transmission back in my cummins and hopefully put a bigger turbo on that, and just got off overtime rotations at work. It's been a crazy year lol. How you been?
#8
Senior Member
iTrader: (29)
Haha I took a little time off from the car thing. Got my camaro back together and running for the time being, getting ready to put the transmission back in my cummins and hopefully put a bigger turbo on that, and just got off overtime rotations at work. It's been a crazy year lol. How you been?
damn nice, i wanna see that running sometime! but i been good man, just busy with school n work. I see that trunk still is looking good
#10
Senior Member
Thread Starter
Join Date: 06-16-09
Location: Sherrodsville, OH
Posts: 1,179
Likes: 0
Received 0 Likes
on
0 Posts
Something small like that i might part out.
#11
Senior Member
Join Date: 08-31-10
Location: Cincinnati
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post