oh i was talking about the silver one in the vid. davidb is on the ms3 boards so you can always pm him and ask because im not sure about it. the ms3 on the slip actually went 11.09 at like 97 with a 2.11 60

 

so wait, theres more then one ms3 there? or are they both the same car? im confused, i dont mean to thread jack, its just a really high trap speed for a ms3 with only an intake.

 

You keep talking about running 12's with all stage 2 well hurry up and do it already. Im tired of reading about what your good for.......

Magical tracks and ****......Do dragons fly over head and pixie dust spray out as you cross the finish line?

 

dude **** you, im sorry im faster than you go cry to your mom you little bitch.

the one that trapped 97 on his best run is the one on the slip. the other ms3 in the vid had a best trap of 95

 

u and me dont agree on much, but im just throwin something out there.

owning a ms3, and modding a ms3 to various stages. i have yet to see just a intake ms3 trap over 85 in the 1/8th. my 111 1/4 trap was a 87 in th 1/8th, ure telling me this guys is 1.5 mph behind me in the 1/8th with only an intake on boost that spikes 16 and drops to 13 as apposed to me holding 18 psi till my higher shift points? let alone more mods that i have lol

no hear to flame, just stating facts

 

haha thats funny stu

 

and im sitting here telling you i dont knwo what the one on the slip has done. go ask him yourself, i already told you his username

 

intake/17psi. Sounds reasonable now.

 

mk, we legit again?

 

not untill u realize spinning doesntn increase trap


sry i had 2 lol

btw if u notice, i believe the first words i said in this post was good job or nice run or nice times, something along those lines

 

they were, and ive told you teh same

 

spinning hard doesn't that hurts it much like my case, but a little spin like 2.1 to a slightly faster 60 and sometimes that results ina better trap from what i have seen, but there are so many factors that can play into that **** its hard to argue.

 

helpful hint; ure wasting ure time running 18 inch drag radials. To big, to heavy, not enough side all.

 

he runs 16's also, and he ran faster on the 18's lol

 

they are also way stickier than my street tires, and allow me to go WOT all the way through first. they showed their effectiveness this weekend. on average my times were 1.5-2 tenths faster.

no i sold those a long time ago

 

imo the gearing u guys have SUCKS

running a 16 inch wheel with a bigger sidewall would not only reduce ure gearing slightly but also give u more cusion to launch and prevent wheel hop.

 

[QUOTE=hatrickstu;1939228]they are also way stickier than my street tires, and allow me to go WOT all the way through first. they showed their effectiveness this weekend. on average my times were 1.5-2 tenths faster.

^ i don't remember what its like to do that in first or second with out spinning

I just wish first gear was longer thats all

 

if overall diameter is the same gearing is identical. wheel hop is a thing of the past now with the mounts and CAB's

 

yeah my cab's fell apart after 3 months, im working on a differetn fix though but before i try anything i want to see how drag bags and drag radials do for me

 

just put spring compressers back there, they cost $9. thats what i used to use and prolly need to go back to using. what brand CAB's did you have?

 

jbp, they will all do it eventually no matter what becuase the design is wrong and everyone got theres from jbp. They openly admit it in the control arm thread recently

 

and are they going to do something about it?

 

nope they will offer to refill them for you if you send them a email but you have to fill out a form mail it to them with the bushings and they will do there thing. They help huge but i don't want to always worry about **** breaking

 

qftt that's why I have 26x10.5 et streets

 

Please excuse my ignorance, but I would like to know more about sprin compressors since I've never heard of them. I was thinking about drag bags too.

Also, what are CAB's? Are they the same thing as the BWoody Traction Bars? If so, I'd like to know more about their failures. I have the Bwoody's, but haven't installed them yet.