Impulse finally starts his Fiberglass build
#26
Subscribed to see the progress. I'm wanting to start on fiberglass this summer. Probably start small and build a few model car displays first to get used to it before I try anything in the car. Cant wait to see updated pics.
#28
Banned
Thread Starter
Join Date: 08-04-06
Location: New York
Posts: 3,153
Likes: 0
Received 0 Likes
on
0 Posts
it's going to the moon !! nah but really here's some updated pics of the layers outside the box. let me tell you this, i was in bliss lol. glassing sitting down with the birds chirping n **** lol and the resin not jellin on me till i was done laying the matt. -next step probably a few more layers then after it's done curing i'll trim it down with cutting wheel , sander etc.
-i was out getting some more mekp for the resin at west marine and I saw this lol. an on duty cop stopping at the bank. take it two ways: i originally thought she was gonna pull me over for exhaust etc. / should she really be at the bank?
-i was out getting some more mekp for the resin at west marine and I saw this lol. an on duty cop stopping at the bank. take it two ways: i originally thought she was gonna pull me over for exhaust etc. / should she really be at the bank?
#35
Banned
Thread Starter
Join Date: 08-04-06
Location: New York
Posts: 3,153
Likes: 0
Received 0 Likes
on
0 Posts
well tomorrow ill probably add another 3 layers or so and then trim the edges. I had a lil free time today but not enuff to glass so I started a small sideproject. I'm cf wrapping my front bowtie and the shifter knob upper trim. rear bowtie later. pics probably tomorrow.
#36
sick man. i didnt know u were doing this. u dynomattin that trunk. u better ur wing mite fall off. let me know if u need alot. ill get u a good price on a trunk kit. pm me or what not. keep it up man, looks good!
#38
Banned
Thread Starter
Join Date: 08-04-06
Location: New York
Posts: 3,153
Likes: 0
Received 0 Likes
on
0 Posts
and here's the rest so far
here's my ghetto stand made of my girls cosmo and some paper! (mcgiver i'm tellin u) & the piece wrapped w/o resin
-after the first coat of epoxy resin
-this is the top shifter trim wrapped with first layer of epoxy resin also it will look different later you will see. (just so you know this piece is crystal clear i had shitty light for the photo so it looks dull. these are my cell cam shots b/c i can't find my digi cam Power cord!)
here's my ghetto stand made of my girls cosmo and some paper! (mcgiver i'm tellin u) & the piece wrapped w/o resin
-after the first coat of epoxy resin
-this is the top shifter trim wrapped with first layer of epoxy resin also it will look different later you will see. (just so you know this piece is crystal clear i had shitty light for the photo so it looks dull. these are my cell cam shots b/c i can't find my digi cam Power cord!)
#41
Banned
Thread Starter
Join Date: 08-04-06
Location: New York
Posts: 3,153
Likes: 0
Received 0 Likes
on
0 Posts
yeah i had to so i can get a clean cut when i trim it
i find it releases stress
2nd coat on each. these pics suck i wish you could see the depth. they look real nice. i'll let them dry then wetsand and a whole bunch of other ****.
i find it releases stress
2nd coat on each. these pics suck i wish you could see the depth. they look real nice. i'll let them dry then wetsand and a whole bunch of other ****.
Last edited by impulseballer; 05-03-2007 at 08:14 PM. Reason: Automerged Doublepost
#42
Senior Member
Join Date: 07-10-05
Location: Douglasville, Georgia
Posts: 3,482
Likes: 0
Received 0 Likes
on
0 Posts
Reason i say that is. Carbon Fiber is so delicate. One touch will screw up the sheet. But cool stuff to see in person as a sheet. Thickness of the sheet is very important. ive seen thin and thick. big difference
#44
Banned
Thread Starter
Join Date: 08-04-06
Location: New York
Posts: 3,153
Likes: 0
Received 0 Likes
on
0 Posts
#46
Banned
Thread Starter
Join Date: 08-04-06
Location: New York
Posts: 3,153
Likes: 0
Received 0 Likes
on
0 Posts
#47
Banned
Thread Starter
Join Date: 08-04-06
Location: New York
Posts: 3,153
Likes: 0
Received 0 Likes
on
0 Posts
easy way to open/chug beer and make resin cup
-get can of beer
-put your one touch easy can opener on top of the beer
-push the button and allow to cut off lid
-now chug or use for resin
-also here's pics of the carbon fiber but bucket/ashtray that I finished for my uncle. He doesn't have cup holders anymore so I'm gonna keep it.
-put your one touch easy can opener on top of the beer
-push the button and allow to cut off lid
-now chug or use for resin
-also here's pics of the carbon fiber but bucket/ashtray that I finished for my uncle. He doesn't have cup holders anymore so I'm gonna keep it.
Last edited by impulseballer; 05-05-2007 at 08:23 PM.
#49
Banned
Thread Starter
Join Date: 08-04-06
Location: New York
Posts: 3,153
Likes: 0
Received 0 Likes
on
0 Posts
you are mistaken buddy lol. these are the new W3 version 3 10's from JL. They have the same style dust cap as the W6 and W7's which i think is freakin clean and sexy as hell. These are exactly what I was looking for in a sub and they will both get a clean 500 rms each.